The Mini DisplayPort Male to HDMI Female Adapter Cable from Comprehensive Cables allows you to connect a Mini DisplayPort or Thunderbolt source to an HDMI display. This adapter supports resolutions up to 1920 x 1200, allowing you to take full advantage of your HDMI capable display.

Supports PC Resolution up to 1920 x 1200    Supports HDTV Resolution up to 1080p    2.25 Gbps Bandwidth per Channel    Compatible with Thunderbolt

Supports Mini DisplayPort 1.1a input and DVI 1.1 output

Supports DVI highest video resolution 1080p

Supports DVI 225 MHz / 2.25 Gbps per channel (6.75 Gbps all channel) bandwidth

Supports DVI 12-bit per channel (36-bit all channel) deep color

Powered from Mini DisplayPort or Thunderbolt source

Related Questions and Answers

Q: 1. Will this allow me to color grade HDR in Resolve through the HDMI to my HDR TV? Will I run into an important limitation that I should just upgrade to the next level?Windows 10TV - P65-C1

A: Yes. I use this exact card for HDR grading over the HDMI link. Note however, while my project is setup as 4K/59.94/10bit HDR, the output via this card is exactly half that (because it's limited to 4K/30), so I get 4K/29/97/10bit HDR to the grading monitor - this works perfectly well by skipping exactly every other frame on the grading monitor. The EOTF-2084 data gets through correctly, so the HDR luminance is correctly rendered to a HDR display. However, the thing to be aware of, the color space metadata is NOT sent by the card. Thus, to get the color correct you need to be able to set the color by the OSD on the monitor. I have used these cards with both Asus PA32UCX monitors, these work well and have a lot of color mode settings via the OSD to easily match to the color space you're using in Resolve and also the Asus PG27UQ, this can only be set to sRGB or "Wide Color" which is "Native Panel Gamut" this works as a good setting when you set the Resolve project to BT.2020. Note, with the PG27UQ you can't set the color space when in HDR mode, however, if you set the color space to "Wide" in SDR mode it carries over to HDR mode.

Q: 2. PCI external chassis

A: A external chassis that is qualified for the Black Magic Mini Monitor is the Sonnet SE1 https://bhpho.to/3yte1yb It connects to your computer via Thunderbolt 3.

Q: 3. Can you connect to both SDI and HDMI outputs simultaneously from a single input, or can only one of them be active at a time?

A: Yes, the Atomos Shinobi 7" 4K HDMI/SDI Monitor should output via both the SDI and the HDMI output simultaneously.

Q: 4. What specific cable can I use to power from Dtap?

A: Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2

Q: 5. Picture in Picture

A: The Shinobi 7 does not support picture-in-picture mode.

Q: 6. does this camera's hdmi output be connected directly to atem mini pro switcher as an hdmi input?

A: Yes, the Avaya Webcam/Huddle Camera HC020 with HDMI BH #AVHC020WC has an HDMI output and can be connected through an atem mini or USB HDMI capture device.

Q: 7. What are the dimensions and weight?

A: Physical Specifications Dimensions (W x H x D mm) 198 x 133 x 39 Weight 577g / 1.04lb Mount points 1 x Anti rotation 1/4" / 3/8 top and bottom

Q: 8. I need to monitor 10 bit 4k on two displays (both support 10 bit 4k) from the same machine. Could I use 2 decklink cards on one system?

A: The software you are housing must support 2 cards. As well as the motherboard bus. If they are the same image use a distribution amplifier to feed the two monitors.

Q: 9. Is WACADTAP21M Watson 2.1mm barrel to D-Tap cable suitable to power this device?

A: No, the DC barrel needs to be a locking barrel. Here are some other options: Atomos D-Tap to DC Barrel Coiled Cable https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html?sts=pi&pim=Y Atomos Locking AC Power Adapter for Flame Series Monitor https://www.bhphotovideo.com/c/product/1473479-REG/atomos_atompwr012_locking_ac_power_adaptor.html

Q: 10. Will this monitor work with an Arri Alexa XT in arriraw or any other formats?

A: The Atomos Shinobi is a universal display that supports HDMI and 3G SDI. It would work with Arri cameras that output SDI. The Atomos Shinobi also supports loading LUTS as well for monitoring your cameras output.