The 220V 24029EBL ViewShare Tensioned Advantage Electrol 58 x 104" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24029EFL.

119" Diagonal / 16:9 Aspect Ratio    For HC Cinema Vision Surface    1.1 Gain / 100° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Integrated HD Webcam    Low Voltage Control (LVC)

High Contrast Cinema Vision features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness for moderate ambient light. Ideal for video images. Cone: 100° Gain: 1.1

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Will either of these fit a 45-150mm lumix lens?

A: Yes, the SmallRig Matte Box Adapter Ring Kit will adapt to the 45-150 Lumix lens via 52mm adapter.

Q: 2. Is this (the E-58 II 58mm lens cap) the correct replacement cap for the Canon XA10 cameras?

A: This lens cap should work well with the Canon XA10 camcorder as it is designed for 58mm Canon lenses.

Q: 3. So does this lens cap fit the lens with the Canon SL2 of the EF-S 18-55mm f/4-5.6 IS STM Lens?

A: Yes it will fit , 18-55mm lens is 58mm thread

Q: 4. Will this Lens cap fit Canon Powershot SX530HS?

A: The Canon E-58 II 58mm Lens Cap will not fit the Canon PowerShot SX530 HS Digital Camera. If you need a replacement lens cap you would need to get the Canon Filter Adapter FA-DC67A and a 67mm lens cap instead.

Q: 5. Will this fit Canon G7x?

A: The lens retracts into the camera body, no cap is necessary.

Q: 6. Will this fit the Canon EF 28-70mm f3.5-4.5 II Lens (1988)?

A: No, you need a 52mm lens cap. click the link below to view; https://www.bhphotovideo.com/c/product/883410-REG/Canon_6315b001_E_52_II_Lens_Cap.html

Q: 7. Will this fit the Canon EF 28-70mm f3.5-4.5 II Lens (1988) but which takes a 52mm filter?

A: No, you need a 52mm lens cap. click the link below to view; https://www.bhphotovideo.com/c/product/883410-REG/Canon_6315b001_E_52_II_Lens_Cap.html

Q: 8. Does this cap fits a Canon 50mm 1.4 lens?

A: As the Canon EF 50mm f/1.4 USM lens uses 58mm filter threads, yes, the Canon E-58 II 58mm Lens Cap, B&H # CALC58, would be compatible for use with the Canon EF 50mm f/1.4 USM lens.

Q: 9. will the e-58 ll 58 mm lens cap work for canon rebel t7? The lens is 18-55 mm but 58mm is shown for lens cap I guess

A: The Canon EF-S 18-55mm f/3.5-5.6 IS II Lens normally included with the Canon EOS Rebel T7 can accept this Canon E-58 II 58mm Lens Cap.

Q: 10. I have a early 90’s model canon zoom lens EF 35 - 105 mm 1: 3.5-4.5 and need a new lens cover. What will fit?

A: This E-58 II cap will work all versions of the Canon EF 35-105mm Lens.