Expand your network using the 3.3' Duplex LC to Duplex SC Singlemode Fiber Optic Patch Cable from Tripp Lite. Glass fiber, UPC polish, and a yellow OFNR jacket make for a durable interior and housing. Beveled edges make the glass connectors plug with ease. This cable is compatible with networks up to 400 Gb/s and has a 9µm core diameter and 125µm clad diameter. The attenuation of 0.36 dB/km at 1310nm, 0.22 dB/km at 1550nm, and an insertion loss of 0.3 dB helps fight against signal distortion.

LC Duplex Male Connectors    SC Duplex Male Connector    9µm Core Diameter    UPC Polish

Related Questions and Answers

Q: 1. Can the center column be removed to get lower to the ground?

A: Yes the center column can be removed and flipped upside down for shooting lower to the ground. You just need to remove the screw on the bottom and it will remove easily.

Q: 2. what is the height from the attachment point to the top?

A: If you mean from the base where it connects to the tripod, its 9.5". The distance from the camera plate to the top is about 7".

Q: 3. Is it made in Italy?

A: Yes, it's made in Italy.

Q: 4. Or is there a short column...?

A: There is not a short center column for this tripod.

Q: 5. Will this gimbal support a Canon 600 F4 and a Canon R6? Thanks..

A: Yes, the Oben GH-30C Carbon Fiber Gimbal Head supports a Canon 600 F4 and a Canon R6.

Q: 6. Are there threads in the feet to so that spiked feet may be installed?

A: The bottom tube is only 14.7mm wide and is not threaded. So there is no way to screw a spike into this tripod.

Q: 7. Is the suggest accessory Oben QR-53 Long Lens Quick Release Plate (5.3") really necessary? It comes with an arca swiss fitting.

A: The answer would depend on which lens you will be using on the camera. If you are using a telephoto lens that has a tripod collar with a short base (such as a 70-200mm lens, a 100-400mm lens or a 150mm/180mm macro lens), the If you are using a large telephoto lens that has a tripod collar with a longer base, or you need a longer plate to give you more room to adjust the camera/lens' center of balance on the gimbal head, then the longer Oben QR-53 Long Lens Quick Release Plate (5.3") may be better suited for your usage needs.

Q: 8. Is it compatible with the quick releasing mount on the cobra strike monopod? Would be cool to quickly snap in a tripod head or slider right on top

A: This item does not have the same quick release system that is used on the Cobra Strike Monopod.

Q: 9. Is it compatible with the Sony 400mm f2.8?

A: Yes, this is compatible will large super-telephoto primes like the 400mm f/2.8. :)

Q: 10. 11 lbs limit has me concerned. My setup is a D300s with battery pack and Sigma 150-600 plus a 2lb gimball. That puts me at around 9 pounds, without any added weight I might apply by my hands on the camera. Is that too much load for this setup?

A: This tripod will work for you, but If you are planning to extend the legs fully most of the time , consider a model that can handle a heavier load.