The Canare 50 ft HD-SDI Video Coaxial Cable - BNC to BNC Connectors (Red) is a precision serial digital video coaxial cable that offers throughput for HD-SDI video signals for professional broadcast applications. Thanks to dual copper braids that impart high flexibility and foam PE dielectric insulation, this RG6 coaxial cable can be bent around tight corners or run through tight spaces, while still providing a high-quality, low-loss transfer.

18 AWG RG6 SDI Coaxial Cable    BNC Male to BNC Male Connectors    Solid Copper Center Conductor    Dual Copper Braids    Supports SMPTE 259M/292M/424M Standards    75-Ohm HD BNC Connectors    100% Sweep Tested

Transfers serial HD-SDI video signals for professional broadcast broadband facilities

18 AWG RG6 digital video coaxial cable

Dual copper braids for high flexibility and strength

Supports SMPTE 259M, 292M, and 424M standards

100% sweep tested

BCP-B series 75-ohm HD BNC connectors are capable of handling data rates that exceed 3 Gbps SMPTE 424M standards

Suitable for use in HD-serial digital video transfer, mobile applications, HDTV upgrades, broadband facilities, etc.

Related Questions and Answers

Q: 1. will it record 10bit n-log on the nikon z6?

A: Duplicate

Q: 2. Can the 400s pro handle a 10 bit color depth output?

A: Hi John, the Mars 400S Pro can handle 8 bit color depth output

Q: 3. In the product images the Video Assist has a histogram displayed. Does this monitor support other scopes: false color, vector, etc?

A: At this time, outside of histogram, audio meters, timecode display, and more it is not known exactly what the Blackmagic Video Assist will display. Please watch the B&H website for updates as they are known.

Q: 4. Hi, Can this record 1080 60pfs (or120pfs) from Canon XC10 camera in Prores?

A: The Canon XC10 can output 60fps through its HDMI connection in HD mode. It should work with the Video Assist and allow you to record Pro Res up to 60p. However Blackmagic has not yet released a list showing which cameras are compatible and in what modes.You may also want to consider the Atomos Ninja Assassin. It is fully compatible with the XC10 and has the added benefit of being able to record 4k in Pro Res as well.

Q: 5. will it record 10 bit 422 n-log on the nikon z6?

A: It should as long as the video output is set for supported frame rates and resolutions. We have no direct experience with this mode.

Q: 6. Its allow direct USB capture to computer?

A: It will not allow for direct USB capture to a computer.

Q: 7. Will it do 4k@30?

A: No, it will only support 3G video up 1080p60.

Q: 8. Whats the difference with the new 300 pro?

A: Hi Steve, ① The Mars 400S Pro supports both SDI and HDMI the Mars 300 Pro supports Dual HDMI ②The bitrate of the streaming is 12M bps to provide a higher definition of monitoring video quality for Mars 400S Pro, while Mars 300 Pro is 8M bps. ③The Mars 400S Pro supports Direct Video Feed, pls refer to https://www.hollyland-tech.com/products/detail-46.html or leave a msg on Hollyland Support Section.

Q: 9. recording time on a sandisk 128 sdxc card in prores hq?

A: To get the correct answer, the video resolution and frame rate also must be factored in. Since people typically shoot in 1080p24, we will go with that timing. Shooting 108024p on a 128GB U3 SD Card, ProRes 422 HQ will record 40 minutes.

Q: 10. Can I pair this up with a Canon R6?

A: Yes, you will need an HDMI cable to connect the Canon R6 and Video Assist Monitor.