The 220V 24031EBL ViewShare Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24031EFL.

133" Diagonal / 16:9 Aspect Ratio    For HD Progressive 1.1 Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Integrated HD Webcam    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. What gels can I clip on to the barn doors in order to play with the colors? The gels I already own started warping, so I took them off the barn doors.

A: You can use Lee or Rosco gels but don't keep the gels too close to the light.

Q: 2. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 3. color mode?

A: It is a Tungsten light 3200K.

Q: 4. Does this come with a power cable?

A: Yes a very long power cable permanently connected to the light.

Q: 5. Does it have a dimmer?

A: No, there is no dimmer attached. You may wish to purchase one separately.

Q: 6. My flash tube broke. Is that covered in the one year warranty ?

A: Unfortunately, the warranty for this monolight only covers defects in the unit as a whole. It does not cover lamps.

Q: 7. Can the Arri 650, battery powered?

A: Exactly, this spot works only with electric power. It can't be battery power.

Q: 8. Can this case for the 116 work for the Q3? It is muck cheaper than the Q3 case.

A: No, the Leica Protector for Q Typ 116 Half Case will not work for the Leica Q3 Digital.

Q: 9. 5600 k or tungsten?

A: This kit would contain monolights, which produces a color temperature of 5600K.

Q: 10. I was just wondering if anyone has replaced the modelling lamp with an LED light bulb? I imagine you could get a lot more light output from an LED bulb, especially a cree bulb. I understand it would have to be the dimmable variety...

A: It has not been tested by the manufacture. It is not recommended to do that as you can damage the electronics if there is a compatibility issue.