The Canare 6" HD-SDI Video Coaxial Cable - BNC to BNC Connectors (Blue) is a precision serial digital video coaxial cable that offers throughput for HD-SDI video signals for professional broadcast applications. Thanks to dual copper braids that impart high flexibility and foam PE dielectric insulation, this RG6 coaxial cable can be bent around tight corners or run through tight spaces, while still providing a high-quality, low-loss transfer.

18 AWG RG6 SDI Coaxial Cable    BNC Male to BNC Male Connectors    Solid Copper Center Conductor    Dual Copper Braids    Supports SMPTE 259M/292M/424M Standards    75-Ohm HD BNC Connectors    100% Sweep Tested

Transfers serial HD-SDI video signals for professional broadcast broadband facilities

18 AWG RG6 digital video coaxial cable

Dual copper braids for high flexibility and strength

Supports SMPTE 259M, 292M, and 424M standards

100% sweep tested

BCP-B series 75-ohm HD BNC connectors are capable of handling data rates that exceed 3 Gbps SMPTE 424M standards

Suitable for use in HD-serial digital video transfer, mobile applications, HDTV upgrades, broadband facilities, etc.

Related Questions and Answers

Q: 1. is it possible to use an external drive instead of the SD cards?

A: The 3G models do not support external drive recording on the USB. You should consider the 12G models.

Q: 2. Ol,ele grava na sada HDMI da 5D mark II ?

A: Yes it will record the HDM output of the 5D. Note that the HDMI output of the camera may not be the expected frame rate and resolution and may contain in camera displays. It is up to camera settings to obtain a clean feed to the HDMI.

Q: 3. Can this monitor be powered off a v-mount battery? If so, what cable/accessory would I need?

A: Yes, you can use a dummy NPF battery to D-Tap cable and use a V-Mount battery to power the Blackmagic Design Video Assist 3G-SDI/HDMI 5" Recorder/Monitor.

Q: 4. is there a sunhood available for this?

A: At this point we do not carry a hood specifically for the Video Assist. However the monitor has not yet been released so 3rd party manufactures have yet to create a lot of accessories for it, but eventually they will. Please keep an eye on our website for updates and new releases as they become available.

Q: 5. Is it compatible with the Nikon D3300? It can output a clean, free from overlays feed on HDMI.

A: It should be, It has HDMI and mini BNC inputs, so far it takes signal form any device i have tried. I have not tried a Nikon camera, but it works with my Panasonic and JVC video cameras.

Q: 6. This unit workshop with Sony Z5U by HDMI cable

A: In the Z5u, a full-size HDMI socket provides digital audio and video, handy not just for monitoring but for connecting to a high-quality field recorder like the nanoFLASH or the Ki Pro, or capture cards from AJA or Blackmagic Design. Connecting HDMI disables the analog video outputs.

Q: 7. Will I be able to start/stop trigger with the Sony EX1?

A: Yes, very easy to start stop. Touch onscreen to run/stop

Q: 8. Does it have Sound input?

A: Not independent separate analogue inputs, like an XLR, usually if you have an HDMI or SDI output, the audio is embedded in the video signal.

Q: 9. They came with batteries

A: The Hollyland Mars 400S PRO SDI/HDMI Wireless Video Transmission System comes with a DC power adapter. You need to purchase batteries or another DC Power adapter to power the other unit.

Q: 10. Will this recorder let me bypass the 29.59 minute limit on my Canon 5D mkiii? Also, will my 5D output audio to this recorder?

A: You are correct that the 5D Mark III will not send audio over HDMI in the clean HDMI mode. Dennis L was mistakenly speaking about conventional mode where HDMI does carry audio. Regarding the Blackmagic Video Assist: since the output of the camera is the same, you would still need to use a cable for the audio when using the BM Video Assist.