The Canare 3 ft HD-SDI Video Coaxial Cable - BNC to BNC Connectors (Blue) is a precision serial digital video coaxial cable that offers throughput for HD-SDI video signals for professional broadcast applications. Thanks to dual copper braids that impart high flexibility and foam PE dielectric insulation, this RG6 coaxial cable can be bent around tight corners or run through tight spaces, while still providing a high-quality, low-loss transfer.

18 AWG RG6 SDI Coaxial Cable    BNC Male to BNC Male Connectors    Solid Copper Center Conductor    Dual Copper Braids    Supports SMPTE 259M/292M/424M Standards    75-Ohm HD BNC Connectors    100% Sweep Tested

Transfers serial HD-SDI video signals for professional broadcast broadband facilities

18 AWG RG6 digital video coaxial cable

Dual copper braids for high flexibility and strength

Supports SMPTE 259M, 292M, and 424M standards

100% sweep tested

BCP-B series 75-ohm HD BNC connectors are capable of handling data rates that exceed 3 Gbps SMPTE 424M standards

Suitable for use in HD-serial digital video transfer, mobile applications, HDTV upgrades, broadband facilities, etc.

Related Questions and Answers

Q: 1. This unit workshop with Sony Z5U by HDMI cable

A: In the Z5u, a full-size HDMI socket provides digital audio and video, handy not just for monitoring but for connecting to a high-quality field recorder like the nanoFLASH or the Ki Pro, or capture cards from AJA or Blackmagic Design. Connecting HDMI disables the analog video outputs.

Q: 2. Does this unit have the capability of Zebra &/or focus peaking?

A: At this time the statuses that have been announced for the BM Video Assist are: Transport controls, recording status, histogram, audio level, timecode, battery status, and more. No mention of zebra or focus peaking. Perhaps they are part of the design. We will find out after it's release.

Q: 3. Can this monitor be powered off a v-mount battery? If so, what cable/accessory would I need?

A: Yes, you can use a dummy NPF battery to D-Tap cable and use a V-Mount battery to power the Blackmagic Design Video Assist 3G-SDI/HDMI 5" Recorder/Monitor.

Q: 4. Blackmagic design video assist recorder support Video Signal Conversion HDMI to sdi ?

A: Yes, it will do HDMI to SDI or SDI to HDMI conversion.

Q: 5. Does it support Cross Conversion?

A: Hi Baffoe, yes of course.

Q: 6. Do i need to purchase the battery separate?

A: The Blackmagic Video Assist uses Canon LP-E6N Lithium-Ion Battery Packs. Yes, you have to purchase them separately.

Q: 7. If i plug a SDI input, from a Black Magic 4K, will it output the signal on HDMI as well so i can feed it into a wireless transmitter?

A: Both the SDI and HDMI signals are loop through and you are supposed to be able to view either output. And if you can view it, you can transmit it. So it is our opinion you will be able to do what you wish on this yet unreleased item.

Q: 8. Any Idea on a Release Time Frame?

A: There is no date availability at this time unfortunately. Please watch this page for further announcements.

Q: 9. Will this recorder let me bypass the 29.59 minute limit on my Canon 5D mkiii? Also, will my 5D output audio to this recorder?

A: You are correct that the 5D Mark III will not send audio over HDMI in the clean HDMI mode. Dennis L was mistakenly speaking about conventional mode where HDMI does carry audio. Regarding the Blackmagic Video Assist: since the output of the camera is the same, you would still need to use a cable for the audio when using the BM Video Assist.

Q: 10. Will I be able to start/stop trigger with the Sony EX1?

A: Yes, very easy to start stop. Touch onscreen to run/stop