The Canare 6 ft HD-SDI Video Coaxial Cable - BNC to BNC Connectors (Green) is a precision serial digital video coaxial cable that offers throughput for HD-SDI video signals for professional broadcast applications. Thanks to dual copper braids that impart high flexibility and foam PE dielectric insulation, this RG6 coaxial cable can be bent around tight corners or run through tight spaces, while still providing a high-quality, low-loss transfer.

18 AWG RG6 SDI Coaxial Cable    BNC Male to BNC Male Connectors    Solid Copper Center Conductor    Dual Copper Braids    Supports SMPTE 259M/292M/424M Standards    75-Ohm HD BNC Connectors    100% Sweep Tested

Transfers serial HD-SDI video signals for professional broadcast broadband facilities

18 AWG RG6 digital video coaxial cable

Dual copper braids for high flexibility and strength

Supports SMPTE 259M, 292M, and 424M standards

100% sweep tested

BCP-B series 75-ohm HD BNC connectors are capable of handling data rates that exceed 3 Gbps SMPTE 424M standards

Suitable for use in HD-serial digital video transfer, mobile applications, HDTV upgrades, broadband facilities, etc.

Related Questions and Answers

Q: 1. Can this record H.264 Files?

A: The Blackmagic Design Video Assist 3G-SDI/HDMI 5" Recorder/Monitor can not record in the H.264 format.

Q: 2. Will I be able to start/stop trigger with the Sony EX1?

A: Yes, very easy to start stop. Touch onscreen to run/stop

Q: 3. They came with batteries

A: The Hollyland Mars 400S PRO SDI/HDMI Wireless Video Transmission System comes with a DC power adapter. You need to purchase batteries or another DC Power adapter to power the other unit.

Q: 4. Will this give my a7iii unlimited recording?

A: The Video Assist 3G 5" only has 1 SD card slot so you can only record for as long as your SD card can fit. The 7" models are the ones with 2 SD card slots you can use for continuous recording.

Q: 5. I have a Sony NEX-EA50 with the external recorder, truly improve the image of the NEX-EA50 camera?

A: With an external recorder like the BM Video Assist, you can get uncompressed video from the EA50 and save to a high quality codec, assuring you of the highest possible image quality.

Q: 6. Does it come with adapters for the mini sdi to regular sdi?

A: No Adapters come with it. B&H sells a few different cable adapters, Male or Female, different lengths. Pro Video Accessories BNC Female to DIN 1.0/2.3 RG-59 SDI Cable - 3' Generally around 16 to 21 dollars depending on lenght

Q: 7. What file format does this make? MP4?

A: This records ProRes or DNxHD files.

Q: 8. Does this unit have the capability of Zebra &/or focus peaking?

A: At this time the statuses that have been announced for the BM Video Assist are: Transport controls, recording status, histogram, audio level, timecode, battery status, and more. No mention of zebra or focus peaking. Perhaps they are part of the design. We will find out after it's release.

Q: 9. Blackmagic design video assist recorder support Video Signal Conversion HDMI to sdi ?

A: Yes, it will do HDMI to SDI or SDI to HDMI conversion.

Q: 10. I can't change zebra to over 85%-well I can, but it doesn't show anything! last stop is 85%, higher than this zebra just dissapears!Also i cannot change the date or the recording resolution and fps. Also even though my Video Assist is connected via SDI to my Ursa Mini, and trigger is set to 'over sdi' from the camera, pressing record on the camera doesn't start recording on Video Assist.Does anyone have any answers for this quite annoying errors?Nevertheless, it's a great piece of equipment!

A: I noticed a similar but somewhat different problem with my BMCC 2.5K, I have experienced the same Disappearing Zebra's as you have however in my case with my BMCC 2.5K I only loose them when I have my Zebra's set to ABOVE 90%, at 90% they are still there but if I go any higher they are gone. I have my monitor connected via SDI as well so after doing some research I think it might be and issue in part with SDI itself in terms of Legal vs Full range signal (Video vs Data (LOG) levels being transmitted over SDI I have noticed this problem before with RED EPIC and SONY Cine Alta Camera when connected to Blackmagic video devices like the Ultrascope 4K monitor, Both the REDs and Sony cameras are unable to show values above 95IRE on that Broadcast Ultracsope. I believe that because Blackmail Devices are geared toward Broadcast and Broadcast acceptable formats the Video Assist has trouble reading high values of luminance. It could also have to do with the SDI mode is your camera set to display Video dynamic range or Film domains range when you are in your camera's DISPLAY/MONITOR menu? When Blackmagic camera's are set to record RAW internally the SDI is automatically set to output 10-Bit LOG over SDI so the Video Assist might have trouble reading the LOG single over the SDI.In regards to SDI trigger problem, just set it to T/C Run instead of SDI, I know this sounds wrong because you have your camera connected over SDI but in my case with my BMCC 2.5K T/C Run works flawlessly.