The Canare 3 ft HD-SDI Video Coaxial Cable - BNC to BNC Connectors (Green) is a precision serial digital video coaxial cable that offers throughput for HD-SDI video signals for professional broadcast applications. Thanks to dual copper braids that impart high flexibility and foam PE dielectric insulation, this RG6 coaxial cable can be bent around tight corners or run through tight spaces, while still providing a high-quality, low-loss transfer.

18 AWG RG6 SDI Coaxial Cable    BNC Male to BNC Male Connectors    Solid Copper Center Conductor    Dual Copper Braids    Supports SMPTE 259M/292M/424M Standards    75-Ohm HD BNC Connectors    100% Sweep Tested

Transfers serial HD-SDI video signals for professional broadcast broadband facilities

18 AWG RG6 digital video coaxial cable

Dual copper braids for high flexibility and strength

Supports SMPTE 259M, 292M, and 424M standards

100% sweep tested

BCP-B series 75-ohm HD BNC connectors are capable of handling data rates that exceed 3 Gbps SMPTE 424M standards

Suitable for use in HD-serial digital video transfer, mobile applications, HDTV upgrades, broadband facilities, etc.

Related Questions and Answers

Q: 1. Can I record wireless externally on the atomos if I hook it up with the Shogun?

A: Using the Hollyland Mars 400S PRO SDI/HDMI Wireless Video Transmission System as a way to get the signal from the camera to the recorder should work; we see no red flags to say no. However, any blip or drop or defect in the signal will be recorded. We suggest that direct recording is the correct method.

Q: 2. Can I record the HD-sdi output of a Panasonic video switcher at 1920x 1080i 59.94?

A: Yes, you certainly can. We mainly use the HDMI simply because our splitter is an HDMI.

Q: 3. Does this signal transmit/receive with encryption? If so, how secure is the signal?

A: The Hollyland Mars 400S TX/RX does not have built-in encryption.

Q: 4. Hello with this device I can connect to the receiver sdi and hdm signal simultaneously ?

A: Hi Manuel, yes of course.

Q: 5. Anyone find a good option for storage and transport to keep the device safe?

A: There are many hard case options for the Video Assist display. A good choice to consider is this custom model. B&H # JABMVA4KRE https://bhpho.to/3VzkAbs Another idea that is more form fitting for the display could be - Pelican 1400 Case with Foam (Black) BH #PE1400FB https://bhpho.to/3sbgDwk

Q: 6. What's the run time using the watson npf 770 battery?

A: Using the Watson NP-F770 Lithium-Ion Battery Pack (7.4V, 4400mAh), the transmitter will run for almost 3 hours and the receiver will run for about 4.5 hours.

Q: 7. 400 S Pro can you use it for live streaming with magewell capture card ?

A: Yes, you can connect the Hollyland Mars 400S Pro Receiver to the Magewell Capture Card for live streaming.

Q: 8. can you record from a 4k camera ?

A: You can record HD output from a 4K capable camera but you cannot record 4K. The highest resolution possible with the Video Assist is Apple ProRes 422 HQ or Avid DNxHD RAW.

Q: 9. Will this monitor cross convert HDMI input to SDI output and vice versa?

A: Yes, the Blackmagic Design Video Assist 3G-SDI/HDMI 7" Recorder/Monitor will output from the SDI and HDMI ports even when the input is from the other cable type.

Q: 10. Can I feed HDMI in, and plug in SDI out on the other end?

A: Yes, you won't be able to use both at the same time with a single unit. But, you can feed in HDMI in on the transmitter and go SDI out on the receiver (vice versa).