Are Power Conditioning Surge Protector

Surgex Sx1120rt Surge Eliminator & Power Conditioner

Product Code: ga270738
Availability: In Stock

$2,997.00 $4,315.68

Qty

0 reviews Write a review

Description
Reviews (0)

The SurgeX SX1120RT Surge Eliminator & Power Conditioner has remote control capabilities for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ. Switched receptacles can be controlled with an applied voltage (5 to 30 VDC) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX1120RT provides surge protection and power conditioning for audio, video, broadcast, and computer equipment. The units are 20A load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front-panel courtesy receptacle.

The unit features both common mode and normal mode impedance-tolerant EMI/RFI filtering, SurgeX ICE (Inrush Current Elimination), and COUVS (Catastrophic Over/Undervoltage Shutdown) for a complete power conditioning solution.

The SurgeX Advanced Series Mode technology is completely non-sacrificial. The zero let-through technology provides the most reliable protection available. It stops all surges up to 6000V (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.

Advanced Series Mode Surge Protection SurgeX ICE Inrush Current Elimination Impedance Tolerant EMI/RFI Filtering Catastrophic Over/Undervoltage Shutdown

Parameters
Load Rating	20 A @ 120 V
Power Requirement	15 W @ no load
Certifications & Approvals	UL 1449 Adjunct Classification Test Results: 1,000 surges, 6,000 V, 3,000 A, B3 pulse Measured Suppressed Voltage: 170 V, no failures Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818) EMI/RFI Filter, Normal Mode (50 Ω load): 40 dB at 100 kHz, 50 dB at 300 kHz, 50 dB at 3 MHz, 50 dB at 30 MHz EMI/RFI Filter, Common Mode (50 Ω load): 18 dB at 300 kHz, 30 dB at 1 MHz, 50 dB at 5 MHz, 50 dB at 20 MHz
Safety	Surge Let-Through Voltage (6,000 V surge): 0 V Maximum Applied Surge Voltage: 6,000 V Maximum Applied Surge Current: Unlimited, due to current limiting Maximum Applied Surge Energy: Unlimited, due to current limiting Endurance (C62.41-1991 Category B3 pulses): 1 kV > 500,000, 3 kV > 10,000, 6 kV > 1,000 Undervoltage Shutdown: 90 V (resume at 100 V) Overvoltage Shutdown: 145 V (resume at 135 V) Maximum Load Inrush Current During Power-up: 1,000 Joules
Temperature Range	41 to 95ºF (5 to 35ºC)
Relay Contact Rating	Auxillary: 30 V @ 1 A
LED Output	12 VDC, maximum 20 mA (resistor required)
Humidity Range	5 to 95% R.H., non-condensing
Packaging Info
Package Weight	16 lb
Box Dimensions (LxWxH)	21.6 x 14.5 x 7"

Magnetic shielding steel enclosure

9' grounded 3-wire #14 line cord

Eight grounded AC outlets on rear panel (6 switched, 2 always on)

Front-panel courtesy receptacle

Advanced series mode surge protection

Advanced impedance tolerant EMI/RFI filtering

SurgeX ICE inrush current elimination technology

COUVS catastrophic over/undervoltage shutdown

Remote turn-on

Thermal circuit breaker overload protection

Self-test circuit with visual indicator

Made in U.S.A.

Related Questions and Answers

Q: 1. What cables do I need for connecting Canon 5d mark III to the Image Transmission Module? Arnold

A: The 5D Mark III has a Mini HDMI connection. You will need a Mini-HDMI to HDMI cable. https://bhpho.to/2Hji5VU

Q: 2. Will it support Lumix S1H with 24-70 S?

A: Yes it will. Zhiyun-Tech reports it can handle a Canon 5D Mark IV with a 24-70mm zoom lens. If it can handle a 5D Mark IV with such a lens, it will be able to handle an S1H as well.

Q: 3. will this gimbal works with nikon z6 ?

A: Yes, the Weebill-S will work with the Nikon Z6.

Q: 4. What cable do i need to connect Godox TT600 with this pack? I can locate cable for Canon Nikon but not Godox

A: Godox allows you to utilize the Canon cable.

Q: 5. is this compatible with Yongnuo-YN685 (nikon)?

A: Yes it works with the YN685 (nikon). You will need a Cannon cable from flash to pack. And you should be good to go.

Q: 6. Do the quantum Q flashes just plug into this unit?

A: With the exception of the Quantum Instruments Qflash X-model flashes, the Godox PROPAC PB960 Lithium-Ion Flash Power Pack should work with all other Quantum Instruments Qflashes. If the Quantum Instruments Qflash you own is compatible with a Quantum TURBO battery, then it would be compatible for use with the Godox PROPAC PB960 Lithium-Ion Flash Power Pack.

Q: 7. Does the image stabilization work as well on the Olympus cameras?

A: I normally use this lens with the Pana G9 but I did try it with the Oly Pen F and it works well. I think its better on the G9 (dual stabilization) but not by that much. On the Oly's you have a choice of lens OIS, or IBIS if the lens OIS is disabled. Either works well. The two will not work together as they do on a Panasonic body. Its a great lens, I would not let a very small stabilization penalty preclude use with an Oly body.For your info, there is an Oly firmware update dealing with use of the 200f2.8 lens. I have no idea what the issue for Oly was but I recall the needed update was anticipated even before the 200f2.8 was distributed.

Q: 8. Does this lens have an aperture ring?

A: yes

Q: 9. What is the output spec of the charger?

A: The output of this charger is 12V, 1.5 amps.

Q: 10. Can I use this to power the Godox Ving V860II(sony) flash? What cable should I use?

A: Yes

There are no reviews for this product.