The 220V 24033EBLI ViewShare Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24033EFLI.

133" Diagonal / 16:9 Aspect Ratio    For High Contrast Da-Mat Surface    0.8 Gain / 90° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Video Projector Interface    Integrated HD Webcam    Low Voltage Control (LVC)

High Contrast Da-Mat is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. This surface works best in environments with a high-output projector and controlled ambient light. Cone: 90° Gain: 0.8

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 2. I was just wondering if anyone has replaced the modelling lamp with an LED light bulb? I imagine you could get a lot more light output from an LED bulb, especially a cree bulb. I understand it would have to be the dimmable variety...

A: It has not been tested by the manufacture. It is not recommended to do that as you can damage the electronics if there is a compatibility issue.

Q: 3. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 4. Can this be used for outdoor portraits?

A: Probably not unless there is an outlet or something to plug into

Q: 5. What is the maximum watt light you can use?

A: These monolights can only except a modeling lamp up to 60 watts. The strobes themselves offer 100 watt/sec of power on each.

Q: 6. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 7. color mode?

A: It is a Tungsten light 3200K.

Q: 8. Looking for a replacement light for a Britek Halo Flood 1000P #H8048. Will this bulb fit that?

A: I don't know Curt. I do know that I bought this before reading the details. I should have bought the 110 volt, instead of the 220. I bought it for an Arri 1k.

Q: 9. How many strobes. How many soft boxes in the kit.? Modeling lights?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head. The only thing not included in this kit is a bag.

Q: 10. How long is the sync cord? Can you buy a sync cord in longer lengths?

A: The included sync cable is 15 feet long. You can an extension like the Impact Sync Cord Male PC to Female PC (16') B&H # IMPCMPCF16.