The 220V 24030EBLI ViewShare Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24030EFLI.

133" Diagonal / 16:9 Aspect Ratio    For HD Progressive 0.9 Surface    0.9 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Video Projector Interface    Integrated HD Webcam    Low Voltage Control (LVC)

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. How long is the sync cord? Can you buy a sync cord in longer lengths?

A: The included sync cable is 15 feet long. You can an extension like the Impact Sync Cord Male PC to Female PC (16') B&H # IMPCMPCF16.

Q: 2. Does dimming this using an inline dimmer cause an audible hum? I'm trying to get new lights that don't do that. I know I can use scrims too, but I'd like the flexibility if possible. Thanks!

A: You're missing the point of these lamps. If you want to dim it, the best thing is the scrims. They are very effective. In addition, if you are opposed to using scrims for some reason, you have the option of pulling the bulb back. If you need more focus than when it is flooding, you can use barn doors, which you probably want any way. Finally, you can also use a 300W bulb instead of a 650W.

Q: 3. Does it have a dimmer?

A: No, there is no dimmer attached. You may wish to purchase one separately.

Q: 4. Are there two lights included with this unit. Are the lights 5600K?

A: Yes, the kit comes with two Impact One Monolights. They are strobe type lights and are daylight rated.Note the camera you use this with needs to have a sync port or you will need to get an adapter or wireless sync.And this is made for still photos not video.

Q: 5. What kind of slave/remote unit is best for the strobes with a small budget?

A: A good radio trigger option on a small budget that is compatible with this monolight kit is the Impact PowerSync16 DC Radio Slave System. Please see the image below for reference.

Q: 6. I got my Arri 650 plus today, and when i turn the focus knob, it seems that it turns off the light if i turn it all the way left, or all the way right. is that supposed to happen? it feels like the knob is a bit sensitive too. thanks

A: No, this certainly shouldn't happen. Perhaps there's something amiss with the wiring. I suggest taking back for a review or simply exchanging for another.

Q: 7. Can these lights be on for a full shoot, or are they flash/strobe only? Looking to purchase something inexpensive for filming purpose, and won't need the flash setting.

A: You could use the modeling lights for filming but it's probably cheaper to just by led modeling lights with more wattage. I think the modeling lights on this kit is about 60 watts. Modeling lights are used to see the lighting and to help your camera focus on the subject.

Q: 8. How hot do these lights get? What gloves would be sufficient protection?

A: This is a typical hot light. You will want leather gloves - or at least good heavy cloth work gloves if you need to handle this after it has been on for a few minutes and for at least up to about 20 minutes after it is shut off.

Q: 9. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 10. can this light be triggered by another flash?

A: Yes, the nature of it is that it's triggered by a flash. I have three of them, so I connect directly to one through a cord, and that one triggers the other two. But I have also found that my bounce flash will trigger any of them as well, and I think that's what you're asking about.