The black Single Display Mount from Peerless Industries is suitable for mounting a single display that is installed using the Modular series line of mounts (sold separately). This mount is used for 10 to 65" displays.

For use with Modular series flat panel display mounts

Single display mounting solution for 10 to 65" displays

VESA pattern 75/100mm compliant

+20/-5° tilt, lockable in 5° increments

360° rotation

Internal cable management

Powder coat finish

RoHS compliant

Made in USA

Related Questions and Answers

Q: 1. Is this works with SLR old film cameras that have hot shoe mounts???

A: Yes, it should work, it is a manually flash and should work with any camera with a hot shoe.

Q: 2. Is this flash compatible with Pentax K-01?

A: Yes, it works with the K-5, which has the same setup/configuration.

Q: 3. Is this compatible with Nikon D5100 camera?

A: Yes, this is a manual exposure flash that is compatible with most cameras.

Q: 4. is this flash compatible with sony a200 camera?

A: Being that the Sony A200 has a Sony/Minolta type hot shoe, you would need the Vello Hot Shoe Adapter - Converts Sony/Minolta Hot Shoe to Standard Hot Shoe + PC Socket, BH # VEHSACSC in order to use this flash. http://bhpho.to/2JHDwlH

Q: 5. So let me get this straight... I can control multiple YN560-III flashes with this flash ONLY?? No separate radio triggers needed? Just this YN560-IV on-camera and 2 off-camera YN560-IIIs? And I can control the power of the remote flashes directly from the screen/controls of the IV?? I understand that all the flashes in this setup will be MANUAL

A: Joe,Yes, that is correct. However, if you want to control four or more, you have to get the XT contol trigger that allows you to have more lights than you will ever use probably. I purchased the 560-XT trigger so I could have three or four that are at various locations. The only manual part is from your flash on your hotshoe - you literally select the channel of the specific flash - raise or lower the power then go to the next channel of another flash, set it to what you want, etc. It is quite impressive.Michael

Q: 6. Is this compatible with canon R6 ?

A: Yes, the YN560-IV will work with the Canon EOS R6. It is a universal non-TTL-enabled flash, meaning it will be fully manual and trigger via the center pin (and via an off-shoe cord or wireless trigger if used off-camera).

Q: 7. Is this compatible with Sony a7ii?

A: Yes! I've used these with the A7Rii and A7Riii

Q: 8. Does the YN560-IV flash work with sony ar7 without adaptor? Also, I'm interested in using it together with two other manually controlled flashes, so would it work if I use a RF603 mounted in my radio slave to control all three, including the YN560-IV? If so, what RF603 model should I buy?

A: As the Sony Alpha a7R Mirrorless Digital Camera has a Multi-Interface hot shoe, which is similar in size to the standard ISO hot shoe, the Yongnuo YN560-IV Speedlite should be able to connect directly to the hot shoe on the a7R's hot shoe. The Yongnuo RF-603C II Wireless Flash Trigger Kit for Canon 2.5mm Connection, B&H # YORF603IIC1, may also be used on the Sony Alpha a7R Mirrorless Digital Camera. You may connect one to your camera's hot shoe, and it can trigger the Yongnuo YN560-IV Speedlites wirelessly. If your other manual flashes are not the Yongnuo YN560-IV Speedlite or do not have Yongnuo's radio remote built into the flash itself, then the other off-camera flashes would also require the Yongnuo RF-603C II for your needs.

Q: 9. Is this compatible with fuji x s10 ?

A: Yes it works on the Fuji XS10 in manual exposure mode only.

Q: 10. Will this flash work with the Sony A77ii? If not is there an adapter or another Yongnuo model that does?

A: It will work but not TTL of course. Godox makes a TTL flash for Sony, the TT350 flash. You can click the link below to view; https://bhpho.to/2wlC6c2