The 220V 24031EBLI ViewShare Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24031EFLI.

133" Diagonal / 16:9 Aspect Ratio    For HD Progressive 1.1 Surface    1.1 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Video Projector Interface    Integrated HD Webcam    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. does this come with a sync cord?

A: Yes the sync cord is included.

Q: 2. I was just wondering if anyone has replaced the modelling lamp with an LED light bulb? I imagine you could get a lot more light output from an LED bulb, especially a cree bulb. I understand it would have to be the dimmable variety...

A: It has not been tested by the manufacture. It is not recommended to do that as you can damage the electronics if there is a compatibility issue.

Q: 3. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.

Q: 4. What is the maximum watt light you can use?

A: These monolights can only except a modeling lamp up to 60 watts. The strobes themselves offer 100 watt/sec of power on each.

Q: 5. How many strobes. How many soft boxes in the kit.? Modeling lights?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head. The only thing not included in this kit is a bag.

Q: 6. does this unit have hss?

A: No it doesn't have HSS

Q: 7. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 8. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 9. can this light be triggered by another flash?

A: Yes, the nature of it is that it's triggered by a flash. I have three of them, so I connect directly to one through a cord, and that one triggers the other two. But I have also found that my bounce flash will trigger any of them as well, and I think that's what you're asking about.

Q: 10. Does this unit ship with barn doors?

A: No barn doors are sold separately