The 220V 24034EBLI ViewShare Tensioned Advantage Electrol 65 x 116" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and feature as designated by this box. The fabric, roller, and motor that goes with this model number is: 24034EFLI.

133" Diagonal / 16:9 Aspect Ratio    For Pearlescent Surface    1.5 Gain / 80° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Integrated Speakerphone    Video Projector Interface    Integrated HD Webcam    Low Voltage Control (LVC)

Pearlescent offers a higher amount of reflectivity than unity-gain Da-Mat finish, and is designed for use in applications where moderate viewing angles are required. This surface is a good choice when producing video images with a lower output projector or where there is a high amount of ambient light present. Cone: 80° Gain: 1.5

• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Are there also soft boxes included?(:

A: Comes with two soft boxes. I bought with two umbrellas as well, which I used shooting 141 head and shoulders photos on my first assignment. Everything but the synch cord worked perfectly.

Q: 2. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 3. two strobes, two soft boxes, two stands and one sync cord- Are they included in this kit?

A: This kit would include two Impact EX 100 monolights, two softboxes with speed rings, two sync cables, two power cords, flashtube/modeling lamp for each head, a reflector for each head, spare fuses for each head, Impact 8 ft light stands and a 1 year warranty on each head.

Q: 4. My flash tube broke. Is that covered in the one year warranty ?

A: Unfortunately, the warranty for this monolight only covers defects in the unit as a whole. It does not cover lamps.

Q: 5. can this light be triggered by another flash?

A: Yes, the nature of it is that it's triggered by a flash. I have three of them, so I connect directly to one through a cord, and that one triggers the other two. But I have also found that my bounce flash will trigger any of them as well, and I think that's what you're asking about.

Q: 6. Will this work with the remote wireless flash signal produced by the OMD EM-10?

A: I'm unfamiliar with that specific wireless trigger system, but I have used two different wireless triggers with this light kit successfully. As long as the trigger uses a 1/8 mono plug, you should be fine. If not, you can buy adapters to make these things work.

Q: 7. Will this strobe work with 3rd party modifiers, or only the supplied softboxes?

A: That model strobe uses the Elinchrom mount also called EX. There are a few different manufactures that make modifiers with that mount, Elinchrom, Impact and Interfit. Note to be careful when picking it out that it is the correct mount. Impact and Interfit make different mounts not just EX.

Q: 8. what is the power source?

A: The lights include a 120VAC power cord which is a regular USA household plug.

Q: 9. Does this unit ship with barn doors?

A: No barn doors are sold separately

Q: 10. Im Looking for lights that will work for an ecommerce site that will produce an all white pure background with no grey. If i buy two of these kits will I be able to shoot a full body shot on a live model and will the background come out white? my model is 5 10 / 5'11.. thanks

A: I The only way I believe these or any two lights will produce a pure white background is to use a green screen background and remove the background (or make it white) with software. If the exposer is correct for the subject, the exposer will always be somewhat less for the background the difference may be acceptable, but not absolute. can think of one vay these only way these (or any two