Series Mode Surge Protector

Surgex Sxn240 Surge Eliminator & Power Conditioner

Product Code: ga270817
Availability: In Stock

$3,387.00 $5,249.85

Qty

0 reviews Write a review

Description
Reviews (0)

The SurgeX SXN240 Surge Eliminator & Power Conditioner provides surge protection and power conditioning for audio, video, broadcast, and computer equipment. The unit comes in a 12 x 12 x 4" NEMA enclosure and meets the code for use at the service entrance, sub-panels, and in ceiling plenums. The SXN240 is 20A load capable, and has two surge suppression modules, one for each 120V leg.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering for a comprehensive power conditioning solution. The SurgeX Advanced Series Mode technology is completely non-sacrificial. The zero let-through technology provides reliable protection. It stops all surges up to 6,000V (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.

Advanced Series Mode Surge Protection Impedance Tolerant EMI/RFI Filtering

Parameters
Load Rating	20 A @ 208/240 V
Power Requirement	15 W @ no load
Certifications & Approvals	UL 1449 Adjunct Classification Test Results: 1,000 surges, 6,000 V, 3,000 A, B3 pulse and measured suppressed voltage: 170 V, no failures Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818) EMI/RFI Filter, Normal Mode (50 Ω load): 40 dB at 100 kHz, 50 dB at 300 kHz, 50 dB at 3 MHz, 50 dB at 30 MHz EMI/RFI Filter, Common Mode (50 Ω load): 18 dB at 300 kHz, 30 dB at 1 MHz, 50 dB at 5 MHz, 50 dB at 20 MHz
Safety	Surge Let-Through Voltage (6,000 V surge): 0 V Maximum Applied Surge Voltage: 6,000 V Maximum Applied Surge Current: Unlimited, due to current limiting Maximum Applied Surge Energy: Unlimited, due to current limiting Endurance (C62.41-1991 Category B3 pulses): 1 kV > 500,000, 3 kV > 10,000, 6 kV > 1,000
Temperature Range	41 to 95ºF (5 to 35ºC)
Humidity Range	5 to 95% R.H., non-condensing
Listings	Agency listings - ETL and cETL (UL 1449, 2nd edition, CSA C22.2 No.8-M1986, R2000)
Dimensions	12.0 x 12.0 x 4.0" (30.5 x 30.5 x 10.2 cm)
Weight	20 lb (9.1 kg)

Magnetic shielding steel enclosure

Advanced Series Mode surge protection

Advanced Impedance Tolerant EMI/RFI filtering

Self-test circuit with visual indicator

Made in U.S.A.

Related Questions and Answers

Q: 1. Will this support the Canon EOS R with a 24-105mm Lens?

A: That camera and lens is listed on Zhiyun's list of compatible cameras and lenses. https://bhpho.to/2ORmm7m

Q: 2. Will this work with the Sony fx3?

A: Yes, the Weebill-S will be able to hold the weight of the Sony FX3.

Q: 3. Would this work with quantu. Flash ?

A: With a proper cable it will. You will need a Metz cable though which is same.

Q: 4. What is the maximum load for this gimbal, please ?

A: The Weebill-S can hold up to 6.61 lb.

Q: 5. When the camera is removed from the gimbal using the quick release plate. What tripods do you sell that I can attach the camera to using the Weebill plate?

A: The Weebill-S uses a Manfrotto 501 style plate. You could use tripods with the 502 head from Manfrotto or the Benro S6. Manfrotto - https://bhpho.to/2PaOqBW Benro - https://bhpho.to/2PeLB2y

Q: 6. Will this work with the Godox VING V860IIF TTL Li-Ion Flash Kit for Nikon and if so which cable?

A: The V860 has a built in lithium battery it does not have a external HV port as it would not have anything to gain.

Q: 7. Will this work with Sony alpha a 9 ii?

A: Yes, the Weebill-S will handle the weight of the Sony A9ii.

Q: 8. Is Godox PB960 Battery Pack available on carry-on luggage?

A: Yes, it was but check with air-line. I had no issues. Do not forget to disconnect it before travel.

Q: 9. Will it support a Nikon D7500 with 18-300mm lens?

A: At this time we are still waiting for full details on the load capacity of this camera. However Zhiyun-Tech is stating it can balance a 5D Mark IV with a 24-70mm F/2.8 Lens. If it can balance that camera and lens combo it will be able to handle a D7500 with an 18-300mm lens as well.

Q: 10. I have the Godox pro PAC 960 battery pack. What cable would I need it to work with an alien bee 1600?

A: Unfortunately, the Godox PROPAC PB960 cannot power an Alien Bees 1600 monolight. It is made specifically for shoe mount flashes with an external high voltage battery port.

There are no reviews for this product.