The Avenvue HDMI Unlimited LAN Receiver over Single CAT6 connects to an optional transmitter (model # HDM-C6IP-S) to extend an HD video signal with embedded audio up to 393 ft. You can connect to a transmitter directly or via a router. If directly, the transmitter sends the video and audio signal into the receiver's RJ45 input over a single CAT6 cable, and the receiver outputs the signal to a local display via an HDMI output. If via a router, the transmitter connects to the router and the router sends the signal to up to 150 receivers simultaneously over an internet network. When using a router, you can establish and employ either an IP or DHCP address.

The max resolution the receiver and the optional transmitter support is 1080p60/50 and the top audio quality is 7.1 surround sound or otherwise stereo digital audio.

Supports 1080p60/50 Video & 7.1 Ch Audio    Receives from 393 ft Away Over CAT6    Connects to Transmitter or Router    Silicon Image Chipset    RJ45 Input; HDMI and 3.5mm Output    HDMI 1.3a    HDCP Compliant    EDID 1.1    Regenerates HDMI Signal

• Receives 1080p60/50 video with 7.1 ch audio from 393 ft away over one CAT6 cable
• Connects directly to transmitter or alternatively to a router
• Silicon Image chipset
• HDMI 1.3a, HDCP compliant, EDID 1.1
• Regenerates the HDMI signal

Related Questions and Answers

Q: 1. Is this a battery life indicator on the transmitter unit? Hard to know when the battery is about to die otherwise.

A: Yes, the Hollyland Mars 400S PRO SDI/HDMI Wireless Video Transmission System does display a battery voltage indicator on the transmitter unit to monitor battery level of the battery attached to the transmitter.

Q: 2. Will this also transmit the embedded SDI/HDMI audio coming from the camera? For instance, will I hear sync'd audio to video when I plug in headphones to the monitor or iphone?

A: Hi Darren, yes of course.

Q: 3. Hello, I want to run two cameras (transmitters) into two receivers. I want to connect the two receivers to a YoloBox. How do I do this? Do I use the HDMI Out of the receivers into the HDMI 1 and HDMI 2 ports of the YoloBox? Thank You for your help!

A: Yes. Connect the output from the first receiver into input 1 and the output from the second receiver into input 2.

Q: 4. Hi, can I send a signal from a transmitter to two receivers or more?

A: Hi Mauel, yes the Mars 400S Pro supports 1 transmitter to 2 receivers.

Q: 5. Does this support SDI record signal, to trigger a video assist to record for example?

A: We are not aware of this being able to pass an SDI trigger signal.

Q: 6. What is the maximum distance it go.

A: The Hollyland Mars 400S can reach a maximum of 400' line-of-sight transmission to a receiver, or 300' to the mobile app.

Q: 7. Is it possible to power on/off the receiver remotely? I want to send video wirelessly to a projector that is mounted from the ceiling of a high school gym. It's not practical to manually access it every time we use it.

A: The only way to power on/off the Hollyland 400S Pro is to physically press the On/Off button.

Q: 8. Whats the difference with the new 300 pro?

A: Hi Steve, ① The Mars 400S Pro supports both SDI and HDMI the Mars 300 Pro supports Dual HDMI ②The bitrate of the streaming is 12M bps to provide a higher definition of monitoring video quality for Mars 400S Pro, while Mars 300 Pro is 8M bps. ③The Mars 400S Pro supports Direct Video Feed, pls refer to https://www.hollyland-tech.com/products/detail-46.html or leave a msg on Hollyland Support Section.

Q: 9. Can you use the D-Tap to 2.1mm Barrel DC Power Cable with the 400 pro?

A: Hi Alec, yes of course.

Q: 10. Will this transmit to the SmallHD 7" Cine 7 On-Camera 500 RX Monitor?

A: Hi Roemon, Of course. The Mars 400S Pro supports both SDI & HDMI.