The Electro-Voice RE90 is a cardioid, electret condenser hanging microphone designed to capture audio for performances, houses of worship and anywhere a hanging microphone is required. The cardioid polar pattern is effective in minimizing signal at the off-axis sections of the microphone capsule. The pattern greatly reduces room noise, creating a higher tolerance for feed-back when placed near monitors and speakers.

The RE90's flat, wide frequency response provides transparent, smooth signal reproduction of vocal and instrument signals. The sensitivity response enables detailed audio signal at close and distant proximities. The supplied steel wire hanger and holding nut enable horizontal and vertical adjustment for accurate microphone placement. The RE90 is powered via 9 to 52V phantom power source.

The cardioid polar pattern is effective in reduces signal at the off-axis sections of the capsule, minimizing ambient noise and feedback when using near monitors and speakers.

The preamplifier circuitry is shielded to prevent noise caused by electro-magnetic and electro-static activity.

The wide frequency and sensitivity response of the RE90 enables accurate, smooth signal reproduction at close and distant proximities.

Related Questions and Answers

Q: 1. Does this mic need phantom power?

A: No, the Electro-Voice RE50N/D-B Omnidirectional Dynamic Shockmounted ENG Microphone with Neodymium Capsule does not require phantom power for operation. Phantom power should not be engaged on the microphone input used for the RE50N/D-B.

Q: 2. Does the Electro voice ND96 have an on-off switch?

A: The Electro-Voice ND96 Dynamic Supercardioid Vocal Microphone does not have an on/off switch.

Q: 3. Where is the serial number located? thanks, blake

A: On the box.

Q: 4. Will this work with a Canon Rebel T5i?

A: I would have to see the transmitter

Q: 5. MB200W U shaped mounting bracket fit the SX100 speakers?

A: The MB200W bracket is compatible with the SX100+

Q: 6. Can this microphone be used with the Zoom H4n?

A: Yes, the Electro-Voice 635A Handheld Dynamic ENG Microphone can be used with the Zoom H4n Portable Handy Recorder.

Q: 7. how does this microphone work - need a user guide?

A: The Electro-Voice 635A is a wired dynamic mic. most commonly used for interviews. There unfortunately is no instruction manual, but all documentation available is downloadable from the Electro-Voice website.

Q: 8. I already have a Tascam DR-10L Pro. Is there an adaptor that will allow me to use this (or another ENG mic) without a new rec?

A: An adapter cable such as BH #RECASEK100M could technically be used to connect a dynamic ENG mic to the Tascam DR-10L, but this would not be recommended. Dynamic microphones will need more gain than the DR-10L is designed to provide, and results may not be as desired.

Q: 9. I have an Electro-Voice Evolve 50, what EV microphone works with the Evolve 50?

A: You can use any dynamic microphone with the Electro-Voice Evolve 50, including the RE50 B.

Q: 10. This has the same connection as Shure wireless packs that I have. Would it be compatible with the Shure QLXD's?

A: Yes, the Electro-Voice RE-97TX Miniature Omnidirectional Headworn Microphone (TA4-F) will work with Shure QLXD transmitters with TA4 connections such as the QLXD1 beltpack.