The Revo ST-1000 Pro Video Stabilizer is a handheld camera support device designed for shooting smooth, shake-free video. Once mastered, camera operators can use the ST-1000 to create fluid, "floating" camera movements, even when walking or running. The ST-1000 has a max capacity of approximately 4.85 lb, which makes it ideal for HDSLRs and small to midsized camcorders.

The ST-1000 employs a multi-axis gimbal, which isolates the camera from incidental twisting and wobbling motions. The adjustable baseplate features a quick release mounting plate and a bubble level, which can be used for fine tuning the proper balance. A 5-piece counterbalance weight set is also included. The foam padded handle and knurled stabilizer ring support one-handed operation, although two hands are recommended for optimal control.

Enables Shake-Free Handheld Shots    4.85 lb Maximum Load Capacity    Smooth Multi-Axis Gimbal Design    Adjustable Baseplate with Bubble Level    Quick Release Camera Mounting Plate    5-Piece Counterweight Set    Comfortable Foam Padded Handle    Supports One-Handed Operation    Knurled Thumb Stabilizer Ring    Folds for Convenient Transport/Storage

Suitable for HDSLRs and small to mid-sized camcorders (4.85 lb max)

The smooth, multi-axis gimbal enables free-floating movements

The baseplate is adjustable forward, backward and side-to-side

Cameras mount via a sliding quick release plate

Bubble level for fine tuning the proper balance

5-Piece counterweight set (one large and four small weights)

The foam padded handle supports one-handed operation

The knurled thumb stabilizer ring enables panning and tilting

ST-1000 folds for convenient transport and storage

Related Questions and Answers

Q: 1. I'm confused, are there any accessories--especially for a 2nd operator--that the 3S PRO kit does NOT include? Also, can the image transmitter be used to transmit signal without the gimbal?

A: Yes The Transmount is capable of being used without the gimbal. In regards to accessories for a 2nd operator that will depend on what you want the 2nd operator to do. If you want the 2nd operator to have gimbal control (pan/tilt/roll) then the 2nd operator will need a tablet/smartphone with the Zhiyun-Tech app installed on it. They may also want a tripod as it makes controlling the pan/tilt much more natural. If the 2nd operator is pulling focus then you will need some additional accessories. 1. The Crane 3S Pro does not include the wireless control for focus you will need Zhiyun-Tech TransMount Motion Sensor Remote Control for WEEBIL-S & CRANE 2S/3S (BH #ZHGMBCOB05 • MFR #GMB-COB05) 2. the built in transmitter is fairly quick but it is not 0 delay which may throw off the focus puller. Some people may be able to compensate for this but even though the delay is very small it can throw people off when trying to pull focus. you may want to invest in a 0 delay wireless video solution such as a Teradek ACE

Q: 2. What are the differences between the 3s, 3s pro, and 3s-e?

A: Zhiyun offers a number of different package options to accessorize the Crane 3S series and the Crane 3S Pro is a package that comes with the following additional accessories important to video production: -TransMount Image Transmitter -TransMount PowerPlus Battery Pack -TransMount Phone Holder -TransMount Servo Zoom / Focus Motor (Max) -TransMount Servo Focus Motor (Lite) -HDMI Cable: Type C to Type D; Type C to Type C; Type A to Type C Although the other 2 packages, Crane 3S and Crane 3S E do not come with the above accessories, they will be available separately and will be compatible with all 3 packages. The other notable difference is between the Crane 3S and the Crane 3S E. The Crane 3S and the Crane 3S Pro come with the SmartSling Handle, that has an active controller on it. The Crane 3S E comes with an EasySling Handle, which does not have electronic controls on it.

Q: 3. To operate remotely, is line of sight necessary? Could this be mounted on live truck and operated from inside? Or are there extensions available for wired controls?

A: Line of sight isn't necessary. As long as there isn't a concrete wall blocking the transmission, you should be somewhat fine, especially in your case. The Zhiyun Crane 3S can be mounted on a vehicle and operated from inside.

Q: 4. How you control de focus motor remotely, the focus wheel is detachable?

A: Unclear as of now, but the manufacturer suggests you can use the detachable SmartSling Handle.

Q: 5. will the crane 3s Image Transmission System still allow control of the gimbal with a camera that doesn't have a camera control connection?

A: The Zhiyun-Tech CRANE 3S PRO Handheld Stabilizer control system can control just the gimbal even without control to the camera itself.

Q: 6. What matte boxes or matte box mounts are compatible with the rail system this comes with?

A: Unfortunately, the rods are 12mm in diameter and we do not carry matte boxes that have 12mm clamps.

Q: 7. Is the pro model compatable with nikon cameras

A: Yes, there are Nikon cameras which are compatible for control with this gimbal.

Q: 8. is the Crane 3S compatible with the Canon C70?

A: Yes. The Crane 3S is capable of stabilizing the Canon C70

Q: 9. I this gimbal compatible with the Sony FX3?

A: Here is a list of compatible cameras for the Zhiyun Crane 3S. https://oss.zhiyun-tech.com/zyplay/instructions_edit/supportmodel/CRANE%203S%20Camera%20Compatibility%20List%20-%20(EN).pdf

Q: 10. I've lost my Extension Arm for my Crane 3S Pro, where can I purchase a replacement part?

A: For the Zhiyun Crane 3S PRO Handheld Stabilizer, there is the Zhiyun-Tech TransMount EasySling Handle for CRANE 3S/3S-E, which will work as a replacement extension arm. https://bhpho.to/3Pbk67i