This Polar Mitten Camera Case from Porta Brace is a thick, padded cover you can use to keep your Sony NEX-EA50 camera warm, dry, and functioning properly in cold weather. It will also minimize condensation when you bring your camera indoors from the cold. Tested to -50°F, it can be used handheld or tripod mounted. The fleece-lined sleeve keeps your hand warm during filming. The high-loft, heat-reflective insulation accepts air-activated warmers that keep the camera warm, and four warmers are included with the Polar Mitten. The insulated lens cap protects the front element of your lens.

For Sony NEX-EA50    Insulation Protects Camera from Cold    For Handheld or Tripod Use    Insulated Lens Cap Prevents Condensation    Long Fleece Sleeve Keeps Hand Warm    Four Heat Packs Included

Compatible with:
Sony NEX-EA50

Thermal-insulation protects camera in cold weather

Use either on a tripod or when handholding

Insulated lens cap prevents condensation

Long fleece sleeve keeps hands warm

Use with air-activated heat packs in extreme cold

Related Questions and Answers

Q: 1. Besides this adapter do I need another item to attach my Sky-Watcher Evostar ED APO 72mm to a Sony emount ?

A: Along with the Vello T-Mount Lens to Sony E-Mount Camera Lens Adapter, one will need to attach the actual tube that goes into the 1.25" eyepiece slot:Celestron T-Mount Adapter https://bhpho.to/3au5qM4

Q: 2. I have a Sony A6000 with e mount lenses. is this the right adapter to connect the Rokinon 500mm f8 to the a6000?

A: No. The A6000 has an E mount. This is for a A mount body. Here's a link to the correct 1: a href= http://www.bhphotovideo.com/c/search?N=10839140&InitialSearch=yes&sts=pi target= _blank http://www.bhphotovideo.com/c/search?N=10839140&InitialSearch=yes&sts=pi/a

Q: 3. Will this work with the Sony a1?

A: This Lens Mount Adapter is designed to work on the the Sony A1 because it has an E mount.

Q: 4. IS THIS PRODUCT SUFFICIENT TO ATTACH MY SONY E MOUNT CAMERA TO BARSKA SPOTTING SCOPE 30-90X100 FOR DIGISCOPING?

A: I had it attached to a Kowa Lens/Scope 500 mm or with any of the kowa's eyepieces with no problem. it worked very well.Juan

Q: 5. 1. Can I remove a stand? 2. Is it full support for my these lense (nikon 50f1.8D, 85f1.8D, Nikon Ais&Ai lens, Sigma10-20EX DG ?

A: The tripod foot on the Viltrox NF-NEX Lens Mount Adapter for Nikon F-Mount, D, or G-Type Lens to Sony E-Mount Camera cannot be removed. The adapter is compatible with all lenses with a Nikon F mount. However, this manual adapter does not support autofocus or any camera-to-lens communication.

Q: 6. Will this work for a Fuji lens to Sony A1?

A: FotodioX Mount Adapter for Nikon F-Mount Lens to Sony E-Mount Camera allows you to connect Nikon F-mount lenses not Fujifilm. Unfortunatelythere are no lens adapters to connect a mirrorless lens to a mirrorless camera with a different lens mount.

Q: 7. Does this allow metering, and can it be used with Nikon manual focus lenses (AI-S)?

A: The Viltrox NF-NEX Lens Mount Adapter for Nikon F-Mount, D or G-Type Lens to Sony E-Mount Camera does not have built-in electronic contacts. As such, it does not transfer electronic information such as autofocus, image stabilization, aperture control via the camera dials, or EXIF information to the camera. Sony states that correct metering cannot be achieved when you use lenses that do not provide a lens contact. In such cases, adjust the exposure manually by checking it on the recorded image. If you use a Nikon AI-S lens on the above lens adapter, you would either have to open the aperture ring on the adapter to the largest setting, then use the lens' adapter ring to adjust your aperture setting, or vice versa, open the aperture ring on the lens all the way, then use the aperture ring on the lens adapter to control your aperture (this may be preferred if you need a de-clicked aperture for video recording needs).

Q: 8. I'm new at these adapters does the iris control function control the aperture? Or does not have that function

A: It is a separate manual ring to control the iris in the adaptor. It acts like an aperture but the markers does not indicate what aperture it is. It does not control or communicate with the camera aperture. Great for APC-C sized sensor only and mechanical connection from the lens to the camera only. Have darkening at the corners for Full Frame sensor.

Q: 9. How do you set the aperture on the lens to use this adapter? Full aperture or full closure? And what about the adapter aperture?

A: The Viltrox NF-NEX Lens Mount Adapter for Nikon F-Mount, D or G-Type Lens to Sony E-Mount Camera provides the aperture ring to control the f- stops on the lens. If you own Nikon F-mount D type lenses, you must lock the aperture ring to f/22 and control the aperture through the lens adapter.

Q: 10. Will this adapter work with Voigtlander 58mm f1.4 and Sony A7 ii ?

A: must be a nikon mount.