The black JBL AWC82 is a single all-weather passive coaxial loudspeaker designed for high-output, full-range sound reinforcement in various indoor and outdoor applications such as sports facilities, stadiums, fairgrounds, cruise ships, and background music/paging systems.

Capable of up to 250W long-term power handling, it incorporates an 8" Kevlar-reinforced woofer and a 1" fluid-cooled high-frequency driver to produce a high maximum peak SPL of 124 dB and a wide frequency response of 80 Hz to 20 kHz (-10 dB). The coaxial speaker configuration yields a 120 by 120° dispersion pattern for consistent coverage.

The paintable ABS enclosure boasts an IP56 rating for effective weather resistance and a sturdy steel grille backed with open-cell foam for additional protection. An integrated multi-tap transformer—configurable via a rear-panel tap selector—allows operation in 70/100V systems or 8-ohm low-impedance setups. A color-matched U-bracket is included for ease of installation.

Coaxial 8" Woofer and 1" HF Driver    250W Power Handling    120 x 120° Pattern Control    Highly Weather-Resistant IP56 Rating    Integrated Multi-Tap Transformer    Supports 70V, 100V, or 8-Ohm Operation    Passive High-Slope Crossover Network    SonicGuard HF Overload Protection    Includes U-Bracket for Easy Installation

Highly weather-resistant IP56 rating

Coaxial speaker design with 8" Kevlar-reinforced woofer and 1" fluid-cooled high-frequency compression driver

250W power handling (average continuous pink noise) with high sensitivity provides high SPL capability

Consistent 120 x 120° broadband pattern control

High-slope passive crossover network for constant coverage and natural midrange

Minimum audibility SonicGuard high-frequency overload protection

80 Hz to 20 kHz frequency range (-10 dB), 100 Hz to 20 kHz frequency response (±3 dB)

Built-in 200W 70/100V multi-tap transformer and direct 8-ohm low-impedance transformer bypass

Paintable enclosure is constructed of thick ABS and fiberglass and is heavily braced to maximize low-frequency performance

Heavy-duty, weather-capable U-type mounting bracket is included

Related Questions and Answers

Q: 1. Hello, can be mounted on a xpro500 manfrotto monopod ?

A: Yes, would make a great tilt head and tripod combo.

Q: 2. Can the Manfrotto 520BALLSH 75mm Short Half-Ball be adapted for use on this tripod?

A: No, it would require you to use a bowl adapter Please review the following ProMediaGear 75mm Bowl Adapter (6") BH #PRTRHH2 • MFR #TRHH2 https://bhpho.to/3birdJt

Q: 3. Is this smaller than the 500A?

A: This head is smaller

Q: 4. Need to balance large telephoto (Tamron 150-600mm) on D7500, is there a way to put on a arca swiss plate or other sliding system for balancing?

A: Yes, but only with an adapter. I have "Haoge Quick Release QR Clamp Adapter Convertor for Manfrotto RC2 System to Arca-Swiss Compatible" permanently attached for exactly that purpose. It attaches to the Manfrotto 200PL socket on this head and then accepts standard Arca-Swiss plates.

Q: 5. Hi Experts, I'm a novice and basically trying to buy this head in order to record subjects in motion (flying birds, boots etc) for short length movies. Does this have the speed capability? For a Canon PowerShot SX60 HS.

A: It shouldn't be slower than any other head. However shooting single birds in flight is very difficult. Shooting flocks from a distance will be much easier. Most still photographers handhold their rigs (DSLR+Telephoto) to shoot birds in flight.

Q: 6. How many inches does the center column extend out in the 90 degree position?

A: Without removing the head, I measure 13.5 to 13.75 inches from the center of the tripod to the outside of the head mounting plate. Different heads will add their own height to this.

Q: 7. Will this fit on a gorillapod focus tripod?

A: This head has a fixed pan drag, so any time you panned you would probably end up twisting the head off when panning right to left; or simply twisting the legs of the Gorillapod and ruining your shot.

Q: 8. Could I remove the center column and replace it with a Manfrotto Leveling Center Column with 50mm Leveling Ball?

A: The center column on the Manfrotto MT055XPRO3 Aluminum Tripod can be removed and replaced with the Manfrotto 555B Leveling Center Column - for 055 Pro and 3021 Pro Tripods, BH #MA555B.

Q: 9. Will this head fit on my Sunpak Ultra 6000 PG tripod?

A: Yes, if your sticks have a 3/8 thread. I don't know anything about those sticks, but I know this head has a standard thread.

Q: 10. How do I activate the counterbalance springs in the Manfrotto 808RC4 ?

A: There is an ON/Off selector for the balance spring for both the front tilt movement and the side tilt movement on the Manfrotto 808RC4 3-Way, Pan-and-Tilt Head. Instructions should also be included with the tripod head purchase.