The 15A Power Conditioner with SmartSequencing from Furman is designed for commercial A/V installers who want to combine robust control capabilities via SmartSequencing Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT Remote Power and Energy Management Platform (BB-RS232 adapter required and sold separately).

It features SmartSequencing technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by non-technical personnel. SmartSequencing’s bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1000’ (304.8m) with backwards compatibility with Furman's legacy sequencers.

In addition, the CN-1800S offers robust control options, equipped with RS-232 ports and command sets for integration with control systems. An RS-232-to-Ethernet adapter (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman’s BlueBOLT-hosted remote power and energy management platform.

SMP (Series Multi-Stage Protection) Technology provides the highest level of surge and spike protection (sold separately). Series Multi-Stage Protection (SMP) ensures zero downtime for mission-critical installations by safely absorbing, clamping, and dissipating transient surges and spikes without damage to internal circuitry or connected equipment.

LiFT (Linear Filtration Technology) reduces AC noise linearly across a very wide bandwidth for unequaled audio and video clarity. LiFT (Linear Filtering Technology) ensures maximum performance from connected equipment by reducing AC noise evenly across the audio and video bandwidth.

Extreme Voltage Shutdown (EVS) circuitry safely powers down itself and connected equipment during unsafe voltage periods. Extreme Voltage Shutdown (EVS) safeguards from catastrophic undervoltage (under 80V sustained) or overvoltage (over 145V sustained) conditions. Circuits may be set to auto-reset when voltage returns to normal or manual reset after an event is detected.

SmartSequencing allows bidirectional, safe sequenced power-up/-down operations via the push of a button or turn of a key. SmartSequencing technology allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel

Diagnostic lights provide valuable system information including power quality, protection ok indicator, and extreme voltage indicator

15A maximum current capacity with incorporated 15A thermal circuit breaker

RS-232 compatibility and command set provide integration with control systems, open source, and control programming. RS-232 compatibility and command set provide integration with control systems and an RS-232-to-Ethernet adapter (sold separately) allows for control, programming, and monitoring from any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT platform.

BlueBOLT provides remote access to reboot components, power equipment on/off, and monitor power quality via the Internet from anywhere in the world.

The CN-1800S contains 8 rear panel NEMA 5-15R outlets and 1 front panel NEMA 5-15R outlet

• Multiple units may be daisy-chained at runs of over 1000’ (304.8m) between units with bidirectional communications between units for sequencing on and off large and/or complex systems
• Security covers and sequence on/off keyswitch prevent unauthorized personnel from running/shutting down system or tampering with DIP switches
• Fire alarm shutoff
• 15A capacity
• Safety agency listed NRTL-C and RoHS compliant

Related Questions and Answers

Q: 1. Is the PROPAC Lithium Power Pack PB960 compatible with Canon Speedlite 600 EX-RT?

A: Godox PROPAC PB960 Lithium-Ion Flash Power Pack BH #GOPB960 is designed for use with the following flashes: Bolt VX-760, Godox AD360II, Godox WITSTRO AD360, and Quantum Instruments Qflash T5d-R.

Q: 2. can we be able to balance canon m50 in weebill s?

A: Yes, you will be able to balance a Canon M50 Mark II with the Weebill Lab S.

Q: 3. Hello. I want to use this gimbal with my Canon 7D Mark 2 and the Sigma 18-35 f.1.8. Can I use it with this combo? This is my only doubt on buying the gimbal

A: While not specifically on Zhiyun-Tech's list, other camera and lens combination are on the list that are of a similar size and weight. You should be able to balance and shoot with that combo well on this gimbal.

Q: 4. Will this work with a nikon sb900 speedlight

A: Yes it will but you will need the Bolt CKE2 HV Locking Flash Power Cable for Nikon.

Q: 5. Can this gimbal hold a Canon EOS R5 with the RF 15-35?

A: Yes, the Canon EOS R5 equipped with a Canon RF 15-35mm lens would be under 4 pounds and should stabilize just fine on the Zhiyun Weebill-S.

Q: 6. Zhiyun tech weebill S is compatible with Nikon 1 j5? And for iPhone XR?

A: Yes, the Weebill S will hold the Nikon 1 J5 and iPhone XR comfortably.

Q: 7. What cables do I need to connect it with a Yognuo 685 (canon)?

A: I dont know, I bought it for the 860ii , only to find it does not connect to the Godox 860ii

Q: 8. For the life of me I can't get the lens hood to attach. It's like the lens hood marked H-HS043 is too small. Am I doing something wrong?

A: The lens has a decorative ring that must be removed to attach the lens hood. Hold the lens so that you see 42.5 with the front of the lens on top. You will see two white marks aligned with the 42.5. One of those marks is on the lens itself; the top mark belongs to the decorative ring. You must grasp the ring quite firmly to remove it; turn it counter-clockwise and remove it. Now you can attach the lens hood. Note that the decorative ring will not be properly attached until the two white marks are aligned. The lens hood itself does not have a corresponding white mark, although it should. Both the decorative ring and the lens hood have a definite click when properly attached.

Q: 9. will this work with Godox VING V860IIF TTL Li-Ion Flash Kit for Fujifilm Cameras B&H # GOV860IIF MFR # V860II F/FUJIFILM KIT ?

A: Yes, use a canon CZ cord

Q: 10. Can you mount the hood in reverse for transporting?

A: The hood, like most other Panasonic-Leica lenses, slides onto the front and secures with a set screw. The hood can be reversed and tightened onto the lens for travel.