You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Canare L-4e6s Star Quad Xlrm To Xlrf Microphone Cable (10', White)

Canare L-4e6s Star Quad Xlrm To Xlrf Microphone Cable (10', White)
  • Product Code: ga271186
  • Availability: In Stock

$74.85 $93.56

The white, 10' L-4E6S Star Quad XLRM to XLRF Microphone Cable from Canare is especially designed for handheld microphone applications in live sound, rehearsals, and other situations. In addition to mic-level signals, the cable can also be used to carry line-level signals such as for connecting your mixer to power amps.

The L-4E6S Star Quad cable features a 4-conductor design that is engineered to substantially reduce vulnerability to electromagnetic and radio-frequency interference when compared with 2-conductor cables. It uses 21 AWG copper wire, which features cross-linked, flexible irradiated polyethylene insulation, which is designed to maintain maximum frequency response and to be more heat resistant than ordinary polyethylene. It also utilizes braided copper shielding, which is designed for greater noise rejection and durability than spiral shielding.

The cable also includes cotton filler, which is in place to help to cut down handling noise. This can be beneficial in handheld microphone applications in which the cable may be subject to a substantial amount of movement.

Braided Copper Shield    Flexible in Extreme Cold Weather    4-Conductor-Style Construction    Irradiated Polyethylene Insulation    Designed for Handheld Mic Applications    Reduced Handling Noise    Rejects EMI and RFI    21 AWG Wire

Parameters
Connector 11x XLR 3-Pin Male
Connector 21x XLR 3-Pin Female
Cable Length10' / 3 m
Number of Conductors4
Wire Gauge21 AWG
Outer Diameter0.23" / 6 mm
Jacket TypePolyvinyl Chloride (PVC)
ColorWhite
ShieldedYes
Insulation TypePolyethylene
Nominal Impedance44 Ohms
Conductor Capacitance46.0 pF/ft
Packaging Info
Package Weight0.475 lb
Box Dimensions (LxWxH)7.1 x 6.65 x 1.3"

Cross-linked PE insulation for flexibility even at low temperatures

Related Questions and Answers

Q: 1. is the Nikon AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED Lens better for d5300 or should i buy Nikon AF-S NIKKOR 14-24mm f/2.8G ED Lens?

A: Hi Brian - I am using my AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED Lens with a D7100, and it has served me well. While I am confident the FX 14-24 lens would provide excellent quality photos, it is also over twice the weight and cost. So, unless you plan to use the lens on an FX-format (full frame) camera body, or extensively in very low light conditions, it would seem to be overkill for your D5300. Also keep in mind that the effective minimum focal length is 15mm for the 10-24, and 21mm for the 14-24. I find the extra width useful at times, particularly when photographing buildings 'close up'. I carry my D7100 and two lenses in my PacSafe travel camera bag, and really appreciate the relatively small size and weight of the AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED Lens. Hope this perspective is helpful. Bob C on Feb 10, 2016

Q: 2. will it work for T2i ?

A: Yes. The T2i is compatible with all Canon EOS lenses.

Q: 3. Does it autofocus with Nikon d7200?Is it fully compatible with nikon d7200?

A: I use this lens with a Nikon 7100 and it works perfectly, you should have no problems.

Q: 4. I am using. D750. I had a 18-50mm DX Lens that would end shooting at 28mm. Come to find out I need an fx lens to get accurate focal length. Is this lens going to be a fx type and shoot a 10mm picture without a dx crop

A: This lens is intended for DX (crop sensor) cameras. It will work but you'll have to use the D750 in Dx mode or there will be terrible vignetting.

Q: 5. Is this compatible with d3100? I'm not planning to upgrade but I'm needing a wide angle lens. Thanks

A: Yes it's compatible with D3100

Q: 6. Will this lens work with a D90?

A: Yes, this Lens is compatible with Nikon D90

Q: 7. Can this be controlled by software only? Looking to use an elGato Stream Deck with the "Companion" app from BitFocus (which supports Sony, Panasonic and PTZOptics via Visca)

A: This head can be controlled via visca and if the app/software that you are using will provide standard Visca protocols it should also work on this product

Q: 8. Is this an EF-S mounted lens?

A: Yes, this is a EF-S mounted lens and workes with EF-S adapters.

Q: 9. Is the Nikon 10-20 lens compatible with my Nikon d 90?

A: No. Most older cameras are not compatible. Here's a link to a chart from Nikon: https://www.nikonimgsupport.com/eu/BV_article?articleNo=000035705&configured=1&lang=en_GB

Q: 10. Would this lense work on my Nikon D3400 and D5600?

A: Yes, I use it on my D5500 and its wonderful. Please make sure to update camera's firmware from Nikon's support website since there are some features (I believe the autofocus and/or VR) that require the upgrade with this new lens.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Tenba Tools Cable Pouch (black)

$45.00 $57.60

Products You May Like

Arri Clm-3 Motor To Controller Cable

$390.00 $569.40

Barska 160-position Key Cabinet (key Lock)

$516.00 $737.88

Tiffen 4 X 5.65" Black Satin 2 Filter

$1,527.00 $2,275.23

Paterson 120/220 Contact Proof Printer

$428.85 $660.43

Geovision Gv-pa191 Poe Adapter

$110.85 $171.82