The 220V 24728EBLR ViewShare Tensioned Advantage Electrol 58 x 104" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

Designed to eliminate the extra step of finishing the screen with trim, the screen features ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening, eliminating the need to complete additional trim work. Sliding installation brackets are provided to make it easy to attach the screen housing to the structure above the drop ceiling.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24728EFLR.

119" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    SCB-100 RS-232 Control    Jabra SPEAK 410 MS Speakerphone    Integrated HD Webcam    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. what would i need to use this with a shock mount ?

A: Please contact live chat as we need more detailed info.

Q: 2. Can I directly mount this on my tripod (with 3/8" male screw) to bottom stud and still attach the camera bracket at the other end?

A: Yes, you can mount this arm to a 3/8" male thread as one end of the arm has a 3/8" female thread.

Q: 3. Will this Lens cap fit Canon Powershot SX530HS?

A: The Canon E-58 II 58mm Lens Cap will not fit the Canon PowerShot SX530 HS Digital Camera. If you need a replacement lens cap you would need to get the Canon Filter Adapter FA-DC67A and a 67mm lens cap instead.

Q: 4. Will these work with the SmallRig Lightweight Matte Box 2660?

A: No, the rings are only compatible with the SmallRig Mini Matte Box 3196.

Q: 5. Does this lens cap fit my sx50hs ?

A: Your Canon PowerShot SX50 HS needs the Canon Filter Adapter FA-DC67A B&H # CAFADC67A to take 67mm filters and lens caps. Here is the correct one for you. Canon E-67 II 67mm Lens Cap B&H # CALC67.

Q: 6. Does this cap fits a Canon 50mm 1.4 lens?

A: As the Canon EF 50mm f/1.4 USM lens uses 58mm filter threads, yes, the Canon E-58 II 58mm Lens Cap, B&H # CALC58, would be compatible for use with the Canon EF 50mm f/1.4 USM lens.

Q: 7. Can the camera bracket 'axle' point UP so that a camcorder can sit on TOP of it? The photos show the post which looks like the support for the bracket pointing DOWN such that the camera would have to hang upside down.

A: Yes, the camera bracket 5/8 pin can sit on top. It moves 180 degrees. You can see the pivot on the arm in this photo, https://bit.ly/2WScxtK .

Q: 8. Is this (the E-58 II 58mm lens cap) the correct replacement cap for the Canon XA10 cameras?

A: This lens cap should work well with the Canon XA10 camcorder as it is designed for 58mm Canon lenses.

Q: 9. Will this lens fit the 18-55 lens that came with my Canon Rebel T3i?

A: Yes, but here's how you can check for yourself. Look at the front of the lens. It will say on the inner front ring that it is a Canon Zoom Lens EF-S 18-55mm. As you read around the lens you will get to a theta (greek symbol) and 58mm which indicates the diameter of the lens. SO, you need a 58mm lens cap AND 58mm lens filters.

Q: 10. Hi!I have a Zoom H4N. I want to use it for the audio of my Youtube videos of me talking to the camera (never thought I would write something like that in my life...!)To do this, I need your help because I'm a total newbie at this ! So 2 questions :1) What king of connection cord do I need to connect my zoom machine with my DSLR (EOS 60D) ?2) I need a mic that let me be at a distance form my camera while I'm shooting. The same as the one tv announcers clipped to their jacket or blouse on the news. What kind do you suggest me under 150$Thank you so so much for your precious help :)

A: Q1 - I do not have an Zoom H4n but it appears a 3.5mm audio cable will work. Like this one: Sescom LN2MIC-ZOOMH4N - Line to Microphone Attenuation Cable for HDSLR Cameras.Q2 - Any lavalier (ex Polsen, countrymen) mic should work you can purchase them from about $23 and up