Adding color to a specific region of your image, the 150 x 170mm Hard-Edge-Edge Graduated Coral 5 Filter from LEE Filters produces a warm, pinkish coloration to isolated portions of the frame with neutral results maintained in the opposite half of the image. This filter's coloring is densest at one edge and tapers to clear by the middle, with a hard-edged transition between the color and clear areas. This filter is ideally suited for adding color to an otherwise plain scene or to emphasize and complement existing tones in your image.

This filter is constructed from optically correct resin, measures 150 x 170mm, and is compatible with the LEE SW150 filter holder.

Graduated Color Filter    Selective Coloring to a Portion of Image    Resin Construction    Compatible with LEE SW150 Holder

This 5 density filter offers a medium amount of coloration compared to the range of densities available.

Produces a colored portion of an image while retaining a neutral portion for creatively enhancing the look of scenes.

Constructed from optical resin for maintained image quality and clarity.

Filter measures 150 x 170mm, is 2mm-thick, and is compatible with the LEE SW150 filter holder.

Related Questions and Answers

Q: 1. This a square circular polarizing filter. For those who bought this, how do you adjust it while using it with other filters such as graduated neutral density and still maintain the right composition with the position of the graduated filter?

A: Unfortunately with this system there is no option to rotate a polarizer independently of a grad filter. I would recommend getting the Nisi holder for 150mm filters. As far as I know, they are the only brand that has round 150mm polarizers for their system and your lee filters will fit in the slots.

Q: 2. How is this different from the 105mm polarizer?

A: The 105mm filter is threaded and this is a Snap-On Circular Polarizer Filter.

Q: 3. Do it fits on a Canon RF 35mm f1.8 ?

A: Yes it will fit but you would need this adapter: https://bhpho.to/3unUlHv

Q: 4. I bought this filter holder for my Sony A7r3, moving from the older 100 filter system. With the new filter holder, using the 16-35 f2.8 Sony G Master Lens at 16 mm I got the black side of the holder showing? I have to zoom in a bit a little under 20mm. Is that a known issue, Any way to fix it? As a landscape photographer I photograph a lot at 16mm while using my filters. This could be an issue, Any Suggestions?

A: Use a LEE Filters 82mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder B&H # LEARWA82 and remove one of LEE Filters Side Guides that should do it

Q: 5. As this listing is a little sparse, is this just a polarizer or is this the new holder with the polarizer designed specifically for it?

A: This is the polarizer filter with clip on frame designed to snap onto the front filter holder of the Lee100 filter holder system. It snaps in front of the filter slot rather than taking up a filter slot. When used on the new 100 system it eliminates the need for a separate 105mm polarizer and the 105 adapter ring used on the original filter system.

Q: 6. How does this compare to the Progrey Titan CPL?

A: I'm sorry but B&H does not carry Progrey filters so i cannot comment but I can say that Lee filters are very good and have been used by professionals for many years. Other quality brands include Nisi, Haida, Formatt and H & Y.

Q: 7. Is it able to fit for the lenses 72m? (lens nikon Z 4-70 and nikon DX 16-80)

A: Yes, if you own a Nikon NIKKOR Z 24-70mm f/2.8 S Lens for Mirrorless Cameras the front thread of this lens is 82mm. You will need LEE Filters 82mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder BH #LEARWA82. https://www.bhphotovideo.com/c/product/87148-REG/LEE_Filters_WAR082_Adapter_Ring_82mm.html For Nikon AF-S DX NIKKOR 16-80mm f/2.8-4E ED VR Lens BH #RBNI168028VR you will need the 72mm adapter. LEE Filters 72mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder BH #LEARWA72 • MFR #WAR072 https://www.bhphotovideo.com/c/product/87146-REG/LEE_Filters_WAR072_Adapter_Ring_72mm.html

Q: 8. Will this work with the Lee 105 circular polarizer. That I have with the original Lee Filter holder?

A: Yes, with the Lee Pol ring, click the link to view; https://bhpho.to/3oYZRgD

Q: 9. Is this compatible with the SW150 original (Mark 1) system?

A: Yep it works fine with the Mark 1 system! I have both. (Jason, Australia)

Q: 10. Can this be used with a Cokin 100 mm filter holder?

A: It can be used with the Cokin EVO ALUMINUM Z PRO series 100mm filter holder: https://www.bhphotovideo.com/c/product/1324221-REG/cokin_cbze01_evo_aluminum_filter_holder.html