Create cinematic camera movements with the ES-120 48" Carbon Fiber Slider from E-Image. The slider may be used in multiple modes of operation and can support up to 15 pounds. It features a flywheel belt-drive system, offering adjustable resistance via a squeeze mechanism at the top of the flywheel. There's an included crank that can be used the traditional way upon removal of the flywheel. For tripod and stand usage, there are standard 1/4"-20 and 3/8"-16 threads on the bottom as well as a 5/8" stand mount receiver on each end.

The included outrigger feet are individually adjustable for leveling the slider evenly on different surfaces. The camera mounting platform is a large 5 x 5" and has a bubble level, and the tripod mount plate (underneath the rails) is 5 x 6", for sturdier tripod mounting. The slider also supports an optional motion-control accessory that will let you take advantage of the smooth belt drive for time-lapse shooting.

Use in Multiple Modes of Operation    15 lb Payload    Flywheel Belt-Drive System    Adjustable Resistance    Remove Flywheel for Standard Operation    Operate with Included Crank    1/4"-20 and 3/8"-16 Tripod Threads    5/8" Receiver for C-Stands / Baby Stands    Individually Adjustable Outrigger Feet    Supports Optional Motion Controller

• 48" slider supporting up to 15 lb payloads
• Flywheel belt-drive system
• Adjustable resistance
• 1/4"-20 and 3/8"-16 tripod threads
• 5/8" stand mount receivers for C-stands and baby stands
• Individually adjustable outrigger feet
• 5 x 5" mounting surface with a bubble level
• Supports optional motion control accessory
• Sealed-bearing wheel design
• 12 sealed bearings help smoothly distribute weight and minimize movement tolerances
• Adjustable rollers help minimize lateral movement for heavier rigs

Related Questions and Answers

Q: 1. Can this be mounted upside down?

A: Yes.

Q: 2. Does the E-Image ES-120 slider have mounting holes at each end for tripod mounting?

A: Yes. 1/4 and 3/8.

Q: 3. What is the package size?

A: The packaging information for the GVM GP-120QD Motorized Carbon Fiber Video Slider (48") are as follows: The package weight is 12.55lb and the dimensions (LxWxH) are 52 x 11.85 x 4.4".

Q: 4. Does the GP-80QD speed ramp at the end of the travel range and if so, can the user set how slow and how fast the slider ramps up/down?

A: The GVM Professional Video Carbon Fiber Motorized Camera Slider (32") does not offer the option to ramp the speed at each end of the slide currently.

Q: 5. can you mount this slider on light stands?

A: Yes, this has threading in the middle and on both sides.

Q: 6. Can it be mounted on a tripod vertically?

A: This slider is not meant to be mounted vertically.

Q: 7. Does this use a sony NPF Battery and does it come with one?

A: Yes, this uses Sony NP-F style batteries. It includes a battery and charger as well.

Q: 8. Can it be used in a vertical mode? Such a scanning down/up a plant stem.

A: Yes, but the payload limit is significantly reduced. The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30° incline.

Q: 9. How smooth is the manual sliding? Is it comparable to a normal dolly & track?

A: Manual sliding is fairly smooth, but not as seamless and quiet as a normal dolly track.

Q: 10. Is this slider compatible with the Canon M50?

A: Yes, a Canon M50 will work well with this slider.