Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Is this the same spec as the rods used in hollywood arms?

A: Yes. The following unit will adapt to any grip head on the market.

Q: 2. What size clamp would you recommend for clamping a sound blanket?

A: The size clamp you will need will depend partly onto what item you will be clamping the sound absorption blanket. If you are clamping it to a pipe, you would have to take into consideration the diameter of the pipe, as the jaws have to be wide enough to go around the pipe, as well as to hold the blanket. As a catch-all recommendation, I would typically recommend the Impact 2" Steel Spring A-Clamp (Black), B&H # IMSSCA20B • MFR # SSC-A20B, over the smaller Impact 1" Steel Spring A-Clamp (Black) due to its larger size and extra flexibility.

Q: 3. Will this work in a Sonnet Echo Express III-D Thunderbolt 3 Expansion Chassis for PCIe Cards? If so, how would it perform (eg read/write speeds, raid configs)?

A: It is not yet on the list of Sonnet recommended cards. Sonnet does have their own supported: https://www.bhphotovideo.com/c/product/1565788-REG/sonnet_fus_ssd_4x4_e3s_m_2_4x4_pcie_3_0.html https://www.bhphotovideo.com/c/product/1565788-REG/sonnet_fus_ssd_4x4_e3s_m_2_4x4_pcie_3_0.html As far as others please see this link for further info: https://sonnettech.com/support/downloads/manuals/M2_compatibility.pdf

Q: 4. How tall is this without the wheels?

A: Roughly 17 without and 21 with

Q: 5. does each knob tighten its set of grip plates independently of the other?

A: Yes, each knob can tighten its grip plates independently.

Q: 6. The vinyl tips are constantly falling off for me when I use these. Any tips on how to keep them on?

A: You could use some gaff tape to secure the tips to the metal either running the length from end to end on each side (this also stops any reflected light from bouncing off the a clamp) or around the base of the tip onto the metal.

Q: 7. Works in the Mac Pro 2019?

A: The HighPoint SSD7101A-1 M.2 NVMe RAID Controller can be used with a Mac Pro 2019.

Q: 8. Does this provide hardware-based, bootable RAID support on non-HEDT platforms?

A: The HighPoint SSD7101A-1 M.2 NVMe RAID Controller bootable RAID support would be specific to the system it would be used on.

Q: 9. Will this work on the Asus Rog Zenith II Extreme Alpha?

A: Yes, this will work on the motherboard. There are 4 PCIe 4.0 x16.

Q: 10. Will this work with 2010 Mac Pro 5,1?

A: No, the ASUS Hyper M.2 x16 Card V2 BH #ASHYM216CRV2 does not work with a Mac Pro 5,1.