This 4K HDMI Matrix Switch from Black Box routes 4 HDMI sources to 1 HDMI display. Multi-controlled functions include front-panel buttons with LED indicators, IR remote, and serial control, allowing you to operate the system easily. The 4K HDMI switch can operate in auto mode and priority mode. The system can either automatically select the latest video source for display in auto mode, or automatically select a video source following priority order in priority mode. It also offers EDID copy function to ensure the optimal resolution for your application. The built-in serial interface allows users to control the HDMI Matrix through a PC, serial controller devices, or home theater system, integrating the whole A/V environment.

Supports 4 displays as input and 1 HDMI display as output

Supports resolutions up to full HD 1080p/4K

Non-volatile memory stores all settings in case of blackout

Auto-sensing function automatically selects active input source or prioritized source

Control the switch via the front-panel push button or IR remote controller (included)

Individually turn ON/OFF the output port

Optimizes signals by choosing the best output setting from the available alternatives

Compatible with HDTV and 3D HDTV

Complies with HDCP standard

Related Questions and Answers

Q: 1. Can I expect seamless switching from this product?

A: No, this box does not provide seamless switching.

Q: 2. Does this switcher reboots devices on switching between the HDMI Inputs

A: This switch does not trigger or control the devices connected to it; it merely senses whether or not a signal is being sent through and then based on auto or priority modes, addresses the selected signal.

Q: 3. Does this do any upscaling or downscaling?

A: No, the MuxLab 4x4 4K60 HDMI Matrix Switch does not feature video scaling.

Q: 4. What is the frame rate?

A: The ToolBox 6x2 offers 4K frame rates at up to 30fps and HD at up to 60fps.

Q: 5. I need to switch video between 3 HDMI sources (cameras) to 1 HDMI output. I would like the audio to come from only one of the sources regardless of the video source. Can this product do that?

A: no this switcher can not lock to one specific audio source, the audio will always follow video so the audio source will be from the selected video source

Q: 6. can the inputs be used for 4 camcorders and can be switched in vmix?

A: We're afraid not, this is a 4 x 4 PCI HDMI Matrix Switch not a capture device. It does not have video capture capabilities. For a quad HDMI card that will work with vMix we recommend the Magewell Pro Capture Quad HDMI Card (4-Channel), B&H # MA400DEHDMI, instead. https://bhpho.to/2bE2GRV

Q: 7. Can the RS-232 control and infrared control be used at the same time? I have experienced matrix switches where you start entering your from and to with infrared, and when a command comes in on RS232 it resets the infrared command and you have to start over.

A: The RS-232 and the IR can be controlled at the same time on the HDR-8x8-Plus.

Q: 8. Can one source send the signal to the two output channels?

A: A single source may be routed to two displays (two outputs).

Q: 9. Hi, will this work in the following sequence:source matrix av receiver cat6 balun transmitter cat6 receiver balun tvi guess i ask specifically with regard to the EDID management? will it still work when there is the cat6 section in the middle?

A: I am using it with a cat6/HDMI extender: this device a href= http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi target= _blank http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi/a

Q: 10. If a computer is connected to an input and no output is active: Will the computer still detect that it's connected to a monitor?

A: No, unless the MuxLab 4x4 4K60 HDMI Matrix Switch is producing n actual outputting signal, a computer will not see any signal until such action is taken by the switch.