Designed to eliminate the extra step of finishing the screen with trim, the 220V 24715ELS Tensioned Advantage Electrol 69 x 110" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

130" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will one of these fit the thicker part of the zoom ring on the canon RF 24-70 lens?

A: Yes. We highly suggest the following ring for best end-user performance Cool-Lux LuxGear Follow Focus Gear Ring (72 to 73.9mm) BH #COLG7273 • MFR #951416 https://www.bhphotovideo.com/c/search?q=Lux%20Gears&sts=ma

Q: 2. Will this work for the Sony 85 mm 1.8 E mount?

A: You will need the 78 to 80mm size.

Q: 3. 5600 k or tungsten?

A: This kit would contain monolights, which produces a color temperature of 5600K.

Q: 4. I have set this up and use an on-camera flash to trip the two lights BUT I am NOT able to vary the output of the flash. I dial from full to 1/8 but only the modeling light varies in intensity. Am I doing something wrong?Lucian

A: Just to be sure - when reducing flash power, you must dump the flash first and then measure power. This means if the flash is at full power and you reduce it to an 1/8, you must first fire a flash to dump the power out of the flash capacitors and reduce their charge to an 1/8 and then measure your flash output. If the flash remains at full for a 3rd and 4th shot, then it may be faulty.

Q: 5. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 6. Best way to wire this? Straight cable? XLR module for the exit?

A: The is no 'best'. It's a matter of preference.

Q: 7. Hi, which ring should I compare for the canon rf85 STM? Thanks

A: That lens appears to have a 78mm diameter. You would need BH #TITAFGR7880 instead. https://bhpho.to/3qUTKur

Q: 8. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 9. does this come with a sync cord?

A: Yes the sync cord is included.

Q: 10. Does this light unit have a slave so that both lights flash at the same time?

A: Both lights do. Each plugs into the wall separately and a supply synch cord plugs ininto one of thelights you chose. When the shutter goefires that light and the other light fires through the slave trigger works greats the light plugged into the one light