The CSX IRT3 10-Channel Infrared Distance Transmitter from AKG transmits up to ten language channels with a light angle of ±17° to cover the distances of up to 213'. Using PPM (Pulse Phase Modulation) technology, all LED´s cover the same area and distance, regardless the number of channels needed in an application. Hence, exact coverage is ensured even if channel needs change.

The CSX IRT3 can be cascaded almost without limit, due to a signal refresher built in into the transmitter, enabling coverage of very large areas. The transmitter's design eliminates the needs for cooling fans, which also eliminates noise. Clearly visible LED´s make the status readable from the distance, enhancing security for onsite technicians.

For CS5 or as standalone system, works with all types of analog inputs

Mounting bar for wall or ceiling mount

Suitable for conferencing, tour guides, and assistive listening

Related Questions and Answers

Q: 1. Which is better for light painting at night-HP5R or HP7R?

A: The HP7R would be better for light painting at night due to the higher lumens output.

Q: 2. Will the input B on the back accepts quarter inch input? I see a XLR and a quarter inch jack there.

A: Channel B has XLR connectors. The 1/4 inch connectors are for channel A and the link outputs.

Q: 3. How much weight can this support??

A: K&M lists no such data on their website. I can tell you that I've placed no more than 100lbs without issue multiple times. It is very well and heavily built. I would be more concerned with the mounting system in speaker cabinet than the load limit of the distance rod.

Q: 4. 12 V, 500 mA is the requirement for the power adapter for the AKG HP4E according to the specs. Question: Is the tip positive or negative?

A: The manufacturer has not specified whether the power supply for the AKG HP4E 4-Channel Headphone Amplifier has a positive or negative tip, however, a dedicated power supply included with the HP4E.

Q: 5. Will this unit drive a 250 ohm headphone with enough power to where I dont feel like I need a higher power amp?

A: This is a professional, studio- quality headphone amplifier that is compatible with low and high impedance headphones, and will have the power to handle 250 Ohm headphones.

Q: 6. Will this provide you the measurements in feet?

A: Yes the LD70 has both metric and imperial settings.

Q: 7. Does the Pelican 3415M Right Angle Light Gen 2 have a magnet attached?

A: Yes, the Pelican 3415M Right Angle Light Gen 2 (Bright Yellow), B&H # PE3415MRABYL, has an attached clip with an integrated heavy-duty magnet.

Q: 8. My cable box has a port that reads IR. I presume that I may plug this into that port so I can place the cable box out of sight?

A: It's difficult to predict how well any ir extender will work in a particular situation. Lights can be a factor. Kopul intends this transmitter and receiver kit to be used with a switch like this: Kopul HDMI Switcher 4 x 1 B&H # KOHDSW2041 MFR # HDSW-2041. You may be able to use something like this: Kramer 3.5mm to Single IR Emitter Cable (10') B&H # KRCA35MIRE10 MFR # C-A35M/IRE-10

Q: 9. Are you able to change the frequency on this wireless microphone system?

A: No the frequency is fixed at Band 7: 500.1 - 530.5MHz.

Q: 10. Any idea how much amplification is added to the signal?

A: AKG lists the nominal output as 680 mW per channel into 32 Ohms.