Long Handle Portable Vacuum

Switchcraft Shielded Rca Male Connector (long Nickel Handle And Gold Plug)

Product Code: ga28235
Availability: In Stock

$16.50 $21.95

Qty

0 reviews Write a review

Description
Reviews (0)

The Shielded RCA Male Connector from Switchcraft with nickel handle and gold plug features an easy-to-assemble construction with a long handle and plug assembly. The plug features a solid-pin design and a solder cup on the center terminal to make termination faster and easier. The long handle and cable clamp can accommodate cables up to 0.290" in diameter.

Long Nickel Handle Gold Plug 0.290" Cable Diameter Solid-Pin Design Molded Thermoplastic Insulation

Parameters
Electrical	Contact Resistance (Typical D.O.M.J.): <0.20 Ohms Dielectric Withstand Voltage: 500 VAC (Minimum) Insulation Resistance at 500 VDC: 2000 Megohms (Minimum) Insulation Resistance (After MIL-STD-202 Salt Spray): 1000 Megohms (Minimum) Working Voltage: 250 VAC, 140 VDC Current Carry at Working Voltage (Typical D.O.M.J.): 6 A
Mechanical	Design: Solid-Pin Insert/Withdrawal Force: Dependent on Mating Jack Temperature Range: -40 to 185° F / -40 to 85° C Life: Dependent on Mating Jack Maximum Cable Size: 0.290" / 7.37 mm Diameter
Material	Pin: Gold-Plated Copper Alloy Sleeve: Gold-Plated Copper Alloy Handle: Nickel Cable Clamp: C.R.S., Electrotin-Plated Insulator: Rigid Plastic
Dimensions	1.58 x 0.29" / 40.26 x 7.37 mm
Packaging Info
Package Weight	0.03 lb
Box Dimensions (LxWxH)	2.3 x 0.6 x 0.6"

Related Questions and Answers

Q: 1. Can an ethercon cable also be connected to the rear? It looks like maybe the back only accepts a standard ethernet connector?

A: No, the Neutrik NE8FDX-P6 only accepts a locking Ethercon connector on its front face.

Q: 2. Can I attach this end on to the Sennheiser DC 2 BH #SEDC2 to be plugged into the BH #BECOCO15VA to be powered off a v-mount battery?

A: This connector can be soldered on to the bare wire end of the cable on the Sennheiser DC 2 and the be connected to the Bebob Factory GmbH COCO-15V III V-Mount Battery Plate.

Q: 3. Which patch panel are these connectors compatible with?

A: You would use Neutrik NZP1RU-12 Angled Rack Panel with Twelve D-Shaped Cutouts (1 RU) (NENZP1RU12) or Neutrik NZP1RU-8 Angled Rack Panel with Eight D-Shaped Cutouts (1 RU) (NENZP1RU8).

Q: 4. Will the plug fit/thread into an ATH-M50 sleeve? Want to keep the original sleeve so I can use the screw-on adapter. Thx!

A: Specs would suggest that there should be no issues with this.

Q: 5. What is the maximum cable diameter I can use with this?

A: The opening in the handle is 0.300". Something around 0.25" would be ideal to leave some clearance.

Q: 6. Is this jack insulated from the chassis?

A: Yes. The Neutrik RCA Jack Chassis-Mount Socket uses thermoplastic insulation material.

Q: 7. What is the weight capacity of that peak design safety tether? Can it really stop the fall of a 7ibs+ camera? Looks lacking....

A: Based on information provided by Peak Design, their tethering products, like what is included with the ProMediaGear QD Plug Connector for Straps, have a weight capacity of up to 200 pounds.

Q: 8. what is the max. dia. of cable that goes into this plug?

A: The outside diameter of cable used with the Amphenol AC Series RCA Male Cable Connector with Diecast Shell (White) (B&H# AMACPRWHT) should be less than 1/4" (i.e. 6mm).

Q: 9. Is this compatible with the Zoom F4?

A: This 4-pin Hirose connector is compatible with the DC power option on the Zoom F4 digital audio recorder.

Q: 10. Is this connector watertight?

A: The Switchcraft EH Series TOSLINK Female to TOSLINK Female Panel-Mount Connector is not IP rated for water resistance and is not intended for outdoor use.

There are no reviews for this product.