Save desk space and position your monitor just how you like it with the Quick Connect Single Monitor Desk Mount with Articulating Swivel Arm from Mount-It!. Compatible with VESA 75 x 75 and 100 x 100mm standards, the mount will support any flat screen display between 13 and 24" and no heavier than 19.8 lb. Its adjustable settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. Integrated cable management keeps your cables untangled and out of the way. No drilling is required; the mount attaches either onto your work surface with a secure dual c-clamp mechanism, or through your desk with the included grommet. All hardware needed for installation is included, as are setup instructions.

Mount 1 Monitor Above Your Desk    Fits Flat-Screen Monitors from 13 to 24"    Supports Monitors up to 19.8 lb    VESA 75 x 75, 100 x 100mm Compatible    Arm Rotates 360° Around Pole    Monitor Tilts -20 ~ 90°    Rotate Monitor Orientation 360°    Height is Adjustable Along 11.9" Pole    Attaches via Dual C-Clamp or Grommet    Cable Management Keeps Cables Hidden

• The arm rotates 360° around the pole to allow others to view presentations and other media from any direction.
• Adjust the height of your monitor by sliding the arm up and down the 11.9" pole.
• The joint between the two parts of the arm can swivel 360°.
• The mount head that connects the monitor to the arm can swivel 345° side to side.
• Customize your viewing angle by tilting the monitor up 90° and down 20°.
• The VESA mount that holds your monitor can rotate 360° to switch easily from Portrait to Landscape orientation.

Related Questions and Answers

Q: 1. It says it supports up to 22LB is that per arm or all together?

A: The aluminum mount will fit most flat-panel monitors no heavier than 22.0 lb and up to 27 in size 22.0 lbs per monitor

Q: 2. Would this hold the Samsung odyssey g9 49" monitor?

A: Based on the VESA pattern and weight capacity of the mount and monitor, it should work.

Q: 3. What is the length/height from the table to the middle of the VESA mount? Is that what the "max arm extension length" covers in the specs?

A: Please contact the manufacturer directly for this unpublished specification: Mount-It!: Tel: (855) 925-5668

Q: 4. Are the screws for securing monitor to arms included?

A: Yes - everything is included

Q: 5. I am building a custom desk and want to know how much clearance I should leave in the back in order to use this mount. Would two inches be enough? I Plan to have a crossbar run along the back of the desk but I want to have it be far enough into the desk for this to fit

A: I agree with Dany D. below, 3/4 is enough, 1 to be safe.

Q: 6. Can you adjust each arm for each monitor to a different height independently on the pole (to accommodate 2 monitors of different sizes)?

A: Yes you can.

Q: 7. Can the two outside arms be turned around so the monitors are placed in a 360 degree fashion? For a triangular table set-up.

A: Yes: This full-motion desk mount features 15 degree monitor tilt and 180 degree swivel capability at multiple points for fine-tuning monitor positioning. Number of Displays Supported 3, Side-by-Side

Q: 8. Would this hold a 49 inch Dell U4919DW Monitor? It is 25lbs without the stand, but the size was concerning to me.

A: Yes it will.

Q: 9. Will this work with the Gigabyte G32QC?

A: Yes. See specs below. Atdec A-HDA-0818 Specs Load Capacity 17.6 to 39.7 lb (8.0 to 18.0 kg) Compatibility Desk Clamp: Surfaces 0.4 to 2.0" (10.0 to 50.0 mm) thick Bolt-Through: Surfaces up to 2.4" (60.0 mm) thick VESA Compatibility VESA 75 x 75mm and 100 x 100mm Gigabyte G32QC Physical Height Adjustment 3.94" / 100 mm Tilt Adjustment -5 to 20° Mounting-Hole Pattern 100 x 100 mm Lock Slot Yes, Kensington Dimensions (W x H x D) 28.0 x 21.7 x 9.2" / 710.5 x 552.2 x 234.8 mm (with Stand) 28.0 x 16.7 x 4.0" / 710.5 x 423.3 x 102.8 mm (without Stand) Weight 17.20 lb / 7.8 kg

Q: 10. How much weight can this arm handle? I have a 23lb monitor.

A: The Mount-It! Single Monitor Desk Mount, BH # MOMI4761, will support monitors up to 17.6 lbs.