This Switchcraft BNC Female to BNC Female Feed-Through Panel Mount Connector is a 75-ohm adapter that's part of the EH Series, a line of audio, video, and data connectors built into standard panel-mount XLR housings.

Custom combinations of EH Series connectors can be quickly loaded into Switchcraft's Q-G Series panels. Once mounted, connecting your equipment to the back of an EH Series connector is fast and easy. This is an isolated feed-through connector, which mean no soldering is required—standard cabling is simply plugged into the back of your gear, then plugged into the back of the EH Series connector. Although there is a protruding center contact on this BNC that contact is actually a socket, not a pin—the female receives the coupling ring.

The connector is RoHS compliant and mounting screws are included.

No Soldering Required    Mounting Screws Included    RoHS Compliant

Related Questions and Answers

Q: 1. What is the ohms on this connector?

A: I am afraid that the exact Ohm rating of this connector is not listed by Pearstone. However if you must have 75 Ohm we have a similar angled connector from Comprehensive that is specifically rated at 75 Ohm and does not cost that much more. B&H # COABMBFRA will work very well for you.

Q: 2. Will this convert an XLR input from my mixer and send it as an AES/EBU over SDI cable to my BlackMagic ATEM Television Studio?

A: The Sescom SES-AES-EBU-1 is designed to convert an XLR connection carrying a digital AES/EBU signal to a BNC connection for input to your ATEM. In order to connect from a standard analog mixer the output signal would need to be converted to digital first using additional hardware. The Behringer Ultramatch Pro is a common solution.

Q: 3. Can I use this Cable to connect the BM Micro Studio Camera 4K G2 to the ATEM SDI Extreme ISO?

A: Yes, the Blackmagic Design Micro Studio Camera 4K G2 also supports 12G Micro BNC Ports. Yes, The Black Magic Blackmagic Design Micro BNC to BNC Female Cable for Video Assist (27.6") will support the camera.

Q: 4. size?

A: the part size is approximately 1.5 cm square by about 3cm long. Should have a square drive 1 cm to accommodate the piece.

Q: 5. What size crimp die do I need for this connector?

A: Size .187 crimp work perfect!

Q: 6. How flexible is this cable, say compared to Belden 1505F flexible cable? Is it suitable for use for a handheld/shoulder mount wired camera such as for sideline use or an on-stage /pit camera that can't be wireless.

A: The Roland SDI cable I would say is pretty flexible compared to most SDI cables. But compared to the Belden 1505F, the Belden cable is more flexible.

Q: 7. Does this come with screws? If not, what screws should I get?

A: The Canare BCJ-JRUDBK 75-Ohm Panel Flush-Mount BNC Female to BNC Female Receptacle for 12G -SDI (Black) does not come with screws. M3 size screws would be necessary to attach the receptacle.

Q: 8. would this work with 3G/6G/12G Sdi inputs without quality dropping? would i lose the audio signal that comes embeded?

A: This Technec Patchbay is Composite Video only, it will not accept an SDI signal of any kind. We do have some 3G-SDI Patchbays available that you could look in to. For a 4k signal passed through 6G-SDI we have the Blackmagic Design Smart Videohub 12x12. Blackmagic also makes a 40x40 Smarthub that accepts a 12G-SDI signal. Audio will be embedded through any of these solutions.

Q: 9. Will this work with any male BNC or do I need a special one to turn in on and off?

A: The connection size for the Canare 75-Ohm Panel Flush-Mount is standard full size BNC.

Q: 10. What is the proper stripper tool for this BCP-D55UHD connector with L-5.5CUHD cable?

A: The Canare TS100U Coaxial Cable Stripper (5-in-1) is the stripper we recommend for this, BH #CATS100U. https://bhpho.to/3mAHQTH