Designed to eliminate the extra step of finishing the screen with trim, the 120V 24714LS Tensioned Advantage Electrol 65 x 104" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. How well does this work with the AD200?

A: Mounting is the issue, but the barebulb on the AD200 can fill this umbrella.

Q: 2. Will this work on a regular umbrella or just parabolic type?

A: Yes, the Godox Diffuser for 33.5" Parabolic Umbrella will work with regular umbrella's of the same size.

Q: 3. Is this compatible with all profoto heads?

A: Yes, but you must purchase the Broncolor adaptor for profotowhich is part # B-33.401.01 B&H Photo part # BRSRP

Q: 4. Beautybox 65 vs Octabox 75? I read if you add the outer diffuser to the Beautybox it should be similar to the Octa, so basically 2-in-1?

A: With outer-diffusion (included) attached, the result of beautybox 65 can produce a similar result though the even-ness of the light will be less than the Octabox 75. Similarly so, the Octabox 75 is slightly more efficient in light due to its silver interior.

Q: 5. What is the Diameter of the Shell? Is the loop at the end metal or plastic? Photos show both...

A: Excluding the metal loop, the diameter of the shell is 132mm.

Q: 6. How does this compare to the Profoto version?

A: Both units hold up very well. Profoto make a similar unit that just keeps up with a higher demand environment for the more demanding photographer.

Q: 7. What portable light stand with wheels would you recommend for this umbrella? A c-Stand would be quite heavy to transport.

A: The Avenger Roller Stand 17 with Folding Base (Chrome-Plated, 8'), BH #AVA5017, would be a good light stand with wheels to use with the Godox Transparent Parabolic Umbrella (65").

Q: 8. What is the distance across side to side when open?

A: 88 inches

Q: 9. What is the diameter when opened? I understand umbrellas are normally measured rod to rod not diameter.

A: Godox Parabolic Reflector (Silver, 65") front diameter is 63'' when the umbrella is open.

Q: 10. What agency calibrated this measuring tape?

A: Cavision has calibrated the Cavision Cinematographers 65' Tape Measure.