You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Da-lite 24714els Tensioned Advantage Electrol 65 X 104" Ceiling-recessed Motorized Screen (220v)

Da-lite 24714els Tensioned Advantage Electrol 65 X 104" Ceiling-recessed Motorized Screen (220v)
  • Product Code: ga28739
  • Availability: In Stock

$17,640.00 $25,401.60

Designed to eliminate the extra step of finishing the screen with trim, the 220V 24714ELS Tensioned Advantage Electrol 65 x 104" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Key Specs
Front/Rear ProjectionFront
Aspect Ratio16:10
Diagonal123.0" / 312.4 cm
Gain1.3
TensionedYes
Type
SeriesTensioned Advantage Electrol
Front/Rear ProjectionFront
Aspect Ratio16:10
StyleCeiling-Recessed, Wall and Ceiling
Dimensions
Viewing Area65.0 x 104.0" / 165.1 x 264.2 cm
Diagonal123.0" / 312.4 cm
Surface
Finish NameHD Progressive 1.3
Gain1.3
Viewing Angle150 degrees
TensionedYes
Black BackingYes
Controls
MotorQuiet
Low Voltage ControlYes
Casing
Length122.5" / 311.2 cm
General
Voltage220 VAC/50 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

  • Smooth Roll Technology to keep your screen flat
  • Slim-Tab, a lower profile and stronger tab design to keep your screen taut
  • Tensioning Cable System to prevent warping and ensure even lateral tension

  • UL Plenum rated case
  • White powder-coated case for a clean aesthetic
  • Black-backed screen material for enhanced image quality and opacity
  • Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can this be used with Dynalites and does it accept a grid?

A: Yes, that can work with Dynalite flashes.There are many speedrings that will work. This is one, Impact Speed Ring for Dynalite and Lowel Omni-lights, B&H # IMSRDYN MFR # SR-DYN.

Q: 2. Beautybox 65 vs Octabox 75? I read if you add the outer diffuser to the Beautybox it should be similar to the Octa, so basically 2-in-1?

A: With outer-diffusion (included) attached, the result of beautybox 65 can produce a similar result though the even-ness of the light will be less than the Octabox 75. Similarly so, the Octabox 75 is slightly more efficient in light due to its silver interior.

Q: 3. How well does this work with the AD200?

A: Mounting is the issue, but the barebulb on the AD200 can fill this umbrella.

Q: 4. How does this compare to the Profoto version?

A: Both units hold up very well. Profoto make a similar unit that just keeps up with a higher demand environment for the more demanding photographer.

Q: 5. How many stops of light does this diffuser reduce by?

A: The Godox DPU-165T offers roughly one stop of light loss on it.

Q: 6. Is this compatible with any heads besides Profoto?

A: I use this on my Broncolor Siros 800 L.

Q: 7. hi is this umbrella will fit colbor cl60 65w led?

A: Thank you for your question, unfortunately the COLBOR CL60R RGB COB LED Monolight does not have an umbrella mount, however your can use Bowen-S mount Soft-boxes like https://www.bhphotovideo.com/c/product/1736570-REG/colbor_colbor_bp90_quick_setup_parabolic_softbox_with.html https://www.bhphotovideo.com/c/product/1342036-REG/godox_sb_nbm_octa140_sb_nbm_octa_140cm_softbox.html Or you can also look at https://www.bhphotovideo.com/c/product/1785042-REG/colbor_cl220r_220w_rgb_cob_led.html that does have an umbrella mount.

Q: 8. Which speedring do I need to fit this Broncolor Beautybox to a Dynalite Baja B4?

A: The Broncolor Speedring for Bowens Flash Systems B&H # BRSRBQ will fit the Dynalite Baja B4. Please see the image below for reference.

Q: 9. What agency calibrated this measuring tape?

A: Cavision has calibrated the Cavision Cinematographers 65' Tape Measure.

Q: 10. What is the distance across side to side when open?

A: 88 inches

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Aver Ceiling Mount Bracket For Dl30 Camera

$267.00 $357.78

Products You May Like

Rycote Bbg Windshield

$435.00 $565.50

Tiffen 4 X 5.65" Solid Gold 1 Glass Filter

$1,515.00 $1,833.15

X-rite I1basic Pro 3 And I1io 3 Bundle

$17,175.00 $26,277.75

Aja Roi Hdmi To Sdi Mini Converter

$2,685.00 $4,188.60

Busybox Message Kit For Kids (4-pack)

$44.97 $62.06

Arri Super Post Main Cable (3b, 10-pin)

$1,650.00 $2,260.50

Zacuto Z-finder For Canon C70 Cinema Camera

$1,567.50 $2,178.82

Fabfilter Pro-r 2 Reverb Fx Plug-in

$507.00 $755.43