Designed to eliminate the extra step of finishing the screen with trim, the 220V 24716EFLS Tensioned Advantage Electrol 72.5 x 116" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24716EBLS.

137" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Fabric, Roller, Motor Only    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is this a newer model of the WR11?

A: Yes

Q: 2. Can it do paralax motion shots for interview like the OneManCrew from redmicro? Thank you very much

A: We are not aware of this unit being able to create a Parallax Shot. However you could look at B&H # AJMPLX120 from A&J PRO. It is a motorized system that does offer Parallax Shots.https://bhpho.to/2EtEU5x

Q: 3. WHY NO LENS, AND WHERE WOULD ONE ACQUIRE A LENS?

A: There are three recommended lenses for Bosch DINION IP ultra 8000 MP camera from Bosch. B&H # BOLFF8012C35 B&H # BOLFF8012C50 B&H # BOLVF8008CP0 More info from Bosch https://bit.ly/3HGQBtT

Q: 4. Can this be carried in a 28 suitcase if taken out of the box? What are the actual dimensions?

A: Straight out of my box, it measures about 35 in.from end to end. Somewhat similar to a large umbrella. When opened it is 28 28. across. Height is approximately 24 in. when standing on a surface in an open position, dome downward.

Q: 5. AC power cord? Don't see it listed or pictured.

A: Yes, the power supply is included although it is not pictured.

Q: 6. Are the Focusing Stageand Lens Stage included? the picture shows them but is not written in in the box list.

A: Yes, the negative and lens stages are included while the head and baseboard are separate.

Q: 7. Are there any CFL fixtures that will work with this? Looking for this to pull double duty for stills as well as video. I know the D5 will fit in the orb, looking to put a continuous light in here as well.

A: From Westcott's Apollo product description The 28 Apollo can be used with flash, fluorescent sources or hot lights up to 500 watts .

Q: 8. Will this softbox work with an optical trigger? Since the flash is enclosed I was not sure if it would prevent the transmission of the signal from camera to flash.

A: Honest answer is: I don't know. I use the 10m(33ft) cord that Syl Arena recommends. It allows you to control the OCF from the camera's menus. Don't use a curly one, you will pull the light stand over!

Q: 9. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

Q: 10. How long is the power cord?

A: Sangean does not specify but typically the power cable is about 6 feet.