Designed to eliminate the extra step of finishing the screen with trim, the 220V 24704ELS Tensioned Advantage Electrol 45 x 80" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

92" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Id like to try continuous lighting with this. Is this possible and what would be an affordable option that is cool so that it doesn’t get too hot?

A: Kathleen, There are many options out there, but we recommend LED due to the low heat they put off. One of the best solutions is the Solix Compact Kit. Westcott Part #6250 (https://www.bhphotovideo.com/c/product/1362959-REG/westcott_6250_solix_compact_kit.html)

Q: 2. Will this work with a StarFlash 150?

A: Yes, this would work with StarFlash 150.

Q: 3. Good day, will it be synchronized if I put it on Nikon D850 with Godox Professional Studio Flash?

A: It would be synchronized if you buy 2 transceivers - with the included PC cable

Q: 4. Can I use this transceiver with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: If you had 2 of these transceivers you could use it with the Elinchrom D-Lite 400W/s RX 4 Flash Head. The Impact PowerSync 16-80 will not fire the internal receiver on the Elinchrom. You need to have 1 PowerSync 16-80 attached to the 3.5mm sync port of the Elinchrome and 1 PowewerSync 16-80 on the camera.

Q: 5. Is the Impact PowerSync 16-80 Transceiver compatible with the pocket-wizard Plus III ? I have several Pocket wizards and would like to expand with the impact poer synk 16-80

A: No. The different manufacturers use different frequency ranges. Sometimes these frequency ranges are different even among models of the same manufacturer. You must always check if different models are compatible.

Q: 6. Will this work with a speed light?

A: Yes, the 45 Halo is designed to work with speed lights. You will need an adjustable shoe mount umbrella bracket to mount your speed light and the Halo.

Q: 7. I’d like to try continuous lighting with this. Is it possible and if so what would be an affordable but quality option?

A: Yes, it is possible however we recommend a LED light source due to the 300W heat resistance rating that the Halo fabric carries. One popular option for an LED light source is the Solix Compact Kit (Westcott SKU #6250) due to its versatile modifier options and its price.

Q: 8. I bought the Impact PowerSync16-80 Transceiver because it's backward compatible, but it will not fire my Speedlite 430 EX or my Travelite 750's... I can see that it is triggering on the display, but nothing happens. Any advice?

A: The PowerSync 16-80 is backward compatible with the Impact PowerSync 16. The PowerSync 16-80 will only trigger PowerSync 16-80 and PowerSync 16 receivers. When using the PowerSync 16-80, which has 80 channels, with the PowerSync 16, which has only 16 channels, use the dip switch guide found inside the battery door of the PowerSync 16-80. The PowerSync 16-80 uses channels 65-80 to correspond to the 16 channels on the PowerSync 16. Additionally, make sure all groups are shut off on the PowerSync 16-80.

Q: 9. Can you use this with the Amaran 60D?

A: The Neewer Octagonal Softbox (45") is not compatible with the amaran 60D. It is made for speedlights.

Q: 10. Hi, I have a set of 3 Impact VC500WL strobes, does this transceiver work with the internal receiver of the stobes to trigger them?

A: I am not familiar with the Impact strobes. I have used them on Profoto's Acute2 1200 & 2400 generators and Alien Bee 1600. I have found they do not work on Norman 12/12 (very old).