Designed to eliminate the extra step of finishing the screen with trim, the 220V 24704EBLSI Tensioned Advantage Electrol 45 x 80" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24704EFLSI.

92" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will this also be offered with a TA4 Connector? I've only seen a Sennheiser connector mentioned.

A: Yes, you can jam-sync the Tenatcle TRACK E from an Original Tenatcle via the 3.5mm TRS cable.

Q: 2. What's the outside diameter of this adapter?

A: The outside diameter of this adapter ring is 105mm.

Q: 3. Can I use a time code sync as well as a mic/recorder? Like the sync-e. Dual function

A: No, the TRACK E works via Bluetooth with the Tentacle Setup App. You can change the settings, sync it with other Tentacles or start and stop the recording wirelessly. It can also get jam-synced by external Timecode source. But it doesn't give the signal out! So it cannot replace a Tentacle SYNC E.

Q: 4. Does the ballast fit in the flight case too?

A: The Nanlux Flight Case that comes with the Nanlux Evoke 2400B Bi-Color LED Monolight Kit with 45° Reflector and Light-Only Flight Case kit fits the power supply, light and cables. Note, it does not accommodate the 45° reflector.

Q: 5. Will this adapter work directly with 77mm Rokinon Cine lenses? The outside diameter at the front of my cine lenses appear to be approximately 80-83mm, where the lens hood would mount. Does this adapter clamp onto the outside of the lens thread where a lens hood would sit?

A: For my understanding, this particular Genustech Clamp On adapter 80 mm ring is a 'stand alone' clamp on adapter that will only work with a modified lens type or those Duclos Lens, in which I never had used one before. It will not work with any type of screw in adapters or screw on lens. I had ordered this adapter once before and hope that it would work on both my Canon lens and Samyang (Tokinon South east asia title?) with a screw on adapter lens for various size. But it doesn't work. So i had to order screw on adapter ring instead to be able to fit on my Genus Tech matt box.Hope this help.

Q: 6. Is it wireless DMX or is it crmx in the ballast for wireless control?

A: The Nanlux Evoke 2400B Bi-Color LED Monolight Kit with 45° Reflector and Light-Only Flight Case is wireless DMX VIA 2.4GHz not CRMX.

Q: 7. does it work with the genustech production matte box?

A: The Genustech G-COAR-80 Clamp-On Lens Adapter Ring for Select Matte Box (80mm) is designed for the the GML Lite, GWMC Wide Angle, and GPVCMC Panavision Wide Clip-On Matte Boxes and would not be compatible with the Genustech Production Matte Box System.

Q: 8. What would the flight case Light-only total package weight of light, ballast and case and cables? Is it below the 100lbs airline

A: The total weight for the Nanlux Evoke 2400B Bi-Color LED Monolight Kit with 45° Reflector and Light-Only Flight Case, B&H # NAEV2400BSOR, is 149 lb.

Q: 9. Does this works with the revo arcane 114mm matte box from smallrig?

A: Both the REVO ARCANE Matte Box and the Smallrig model are 114mm. We have not tested the SmallRig Clamp-On Ring Kit on the REVO ARCANE. however they should work.

Q: 10. Does the Track E and Sync E need to be connected to the phone all the time ? If the actor moves away from me does it stop working ?

A: No, the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support does not require connection to a device running a Tentacle Sync application to function. App connection does allow control over settings and parameters, however. The device will not cease operation if it finds itself out of Bluetooth range and loses connection to the app.