Designed to eliminate the extra step of finishing the screen with trim, the 220V 24704EFLSI Tensioned Advantage Electrol 45 x 80" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24704EBLSI.

92" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Will this adapter work directly with 77mm Rokinon Cine lenses? The outside diameter at the front of my cine lenses appear to be approximately 80-83mm, where the lens hood would mount. Does this adapter clamp onto the outside of the lens thread where a lens hood would sit?

A: For my understanding, this particular Genustech Clamp On adapter 80 mm ring is a 'stand alone' clamp on adapter that will only work with a modified lens type or those Duclos Lens, in which I never had used one before. It will not work with any type of screw in adapters or screw on lens. I had ordered this adapter once before and hope that it would work on both my Canon lens and Samyang (Tokinon South east asia title?) with a screw on adapter lens for various size. But it doesn't work. So i had to order screw on adapter ring instead to be able to fit on my Genus Tech matt box.Hope this help.

Q: 2. What is the shaft diameter on the Halo? Will it work with Elinchrom Quadra heads?

A: The shaft size is 8mm

Q: 3. Will it Smart Controller compatible ?

A: Unfortunately no. the Mavic 3 classic is compatible with DJI RC Pro, DJI RC, and DJI RC-N1.

Q: 4. WHY NO LENS, AND WHERE WOULD ONE ACQUIRE A LENS?

A: There are three recommended lenses for Bosch DINION IP ultra 8000 MP camera from Bosch. B&H # BOLFF8012C35 B&H # BOLFF8012C50 B&H # BOLVF8008CP0 More info from Bosch https://bit.ly/3HGQBtT

Q: 5. Will this work with a speed light?

A: Yes, the 45 Halo is designed to work with speed lights. You will need an adjustable shoe mount umbrella bracket to mount your speed light and the Halo.

Q: 6. Does the Mavic 3 Classic have the C1 certification in Europe?

A: Yes, the DJI Mavic 3 Classic (No Remote) has the C1 drone certification in Europe.

Q: 7. can this be used in tilta matboxes 114?

A: The SmallRig Clamp-On Ring Kit for Matte Box 2660 (80/85/95/110mm to 114mm) can be considered for use with 114mm opening matte boxes like the Tilta 3-Stage 4 x 5.65" Carbon Fiber Clip-On Matte Box (114mm Back). See the link below: https://bhpho.to/3ZJUBPJ

Q: 8. I’d like to try continuous lighting with this. Is it possible and if so what would be an affordable but quality option?

A: Yes, it is possible however we recommend a LED light source due to the 300W heat resistance rating that the Halo fabric carries. One popular option for an LED light source is the Solix Compact Kit (Westcott SKU #6250) due to its versatile modifier options and its price.

Q: 9. Does this work on nikon d5200?

A: Yes,it will work on a Nikon DSLR with a Nikon mount lens assembly. If the D5200 is an APS-C crop sensor camera, it will provide an equivalent to a 120mm lens on a full frame camera. Manual focus only, manual aperture control, no electronics.

Q: 10. Will this work with a StarFlash 150?

A: Yes, this would work with StarFlash 150.