The white JBL Control 24CT Ceiling Speaker features high-power sound reproduction with a wide frequency response and low distortion. The 130° coverage pattern allows fewer speakers to provide consistent sound levels throughout a space.

The Control 24CT is constructed with a coaxially mounted 4" woofer with butyl rubber surround and 0.75" titanium coated diffraction-loaded tweeter. It includes a 30W multitap transformer for use in either 70V or 100V distributed-line systems. Taps are selected by a front-panel rotary switch. The transformer effectively limits the power to the speaker, so overload is not a concern.

Package includes a pair of Control 24CT speakers each with a grille, backcan and tile rails for fast installation.

Compact Ceiling Speaker    For Background and Foreground Music    For Paging Sound Systems    Coaxial Speaker 4" Woofer & 3/4" Tweeter    Frequency Response: 80 Hz to 20 kHz    130° Coverage    70V/100V Transformer Taps    SonicGuard Overload Protection    Includes Grille, Backcan, Tile Rails

80W power capability

30W multitap transformer for 70V and 100V distributed-line systems

4" woofer and 0.75" titanium-coated tweeter

Extremely wide 130° coverage

7.2" depth from flush ceiling

High power, wide frequency response and low distortion

Packaged with grille, backcan and tile rails for fast installation

Related Questions and Answers

Q: 1. Can they've used as a normal 16 ohm speaker not 70v or 100v?

A: Sort of, you will get sound but it will not operate very well at increased volumes. Ultimately I would not recommend doing it. I think it would eventually damage the voice coil.

Q: 2. CAN IB YPASS TRANSFORMER AND USE OF HI FI AMP SPEAKER TURMINALS?

A: No - the taps cannot be bypassed. These speakers are not designed for home stereo or receiver use:Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W taps100V: 30W, 15W, & 7.5W taps

Q: 3. is it 16 Ohms per pair or per one ?

A: It is 16 ohms per speaker.

Q: 4. Can you use these speakers on a regular home amplifier?

A: The JBL Control 26CT are designed to be use with a 70v commercial amplifier. A home receiver lacks the necessary transformer found in commercial amps like the JBL CSA 1120Z Audio Amplifier; B&H# JBCSA1120Z.

Q: 5. what is the suitable amplifier for 4 Speakers 62P ?

A: That depends on your setup. If you are putting 2 speakers to a channel, on a 2 channel amp, then I would recommend this Samson amp- https://www.bhphotovideo.com/c/product/396457-REG/Samson_SA300_SERVO_300_Power.html. If you have another setup in mind, I would recommend giving our Audio Specialists a call at 800-606-6969.

Q: 6. Can these be mounted in a drop ceiling setup? Will they be too heavy for the tile? Will they sound okay?

A: Yes, the JBL Control 16C/T 2-Way 6.5" Coaxial Ceiling Loudspeakers can be mounted in a drop ceiling. This is their intended use and they will sound just fine.

Q: 7. What is a good head unit to pair with a group of 6 speakers?

A: The Control 26CT has a built in transformer allowing in it to be used in a distributed audio system. These speakers are able to be tapped at multiple wattages. When connected to a 70v audio system, the amplifier must be rated to handle the sum of all speakers connected with an additional 20% for headroom.

Q: 8. I paired these speakers with a Pyle amp (Model PTA4) and they sound bad. Is there an amp that will sound good with an AUX input?

A: The JBL Control 26CT - Ceiling Speaker with Transformer (Pair) pairs nicely with the JBL CSA series such as B&H # JBCSA280Z.

Q: 9. I'm looking at using these for a church system. what do you recommend the placement to be between each speaker on a 9'-12' cathedral ceiling? Do you connect to both 2,3 and 1,4 to daisy chain the speakers or just 1,4 for the loop thru to the next speaker? And finally, can you use a standard 1/4 mono plug to speaker wire to connect the speakers?

A: Unfortunately for such a large job, we would not be able to make accurate recommendations or product suggestions off site. We would highly recommend bringing in a project professional who could inspect your location and make the appropriate recommendations per your design criteria. While we cannot make a specific recommendation, one of our manufacturers does offer this type of service. TOA Electronics is a premier manufacturer of audio and security products and does offer onsite design and installation. B&H would be more than happy to bid out the products required for your project.Please contact Johnathan Allen at 845-729-3482 / jonathan_allen@a href= http://toaelectronics.com. target= _blank toaelectronics.com./a He is an install professional that will be able to handle this type of large project for you.

Q: 10. Can these speaker ideal for a Dolby Atmos heights incealling speakers e.g 5.1.4 setup?

A: Yes, these can be used as Atmos speakers.