You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Sennheiser Wireless Antenna For G-series Beltpack (486 To 558 Mhz)

Sennheiser Wireless Antenna For G-series Beltpack (486 To 558 Mhz)
  • Product Code: ga28872
  • Availability: In Stock

$21.00 $31.71

The G-Series Wireless Antenna from Sennheiser is a spare wireless antenna for the G2, G3, and G4 series beltbacks.

Works with G2, G3, and G4 Beltpacks

Parameters
CompatibilityG2 Wireless Series
Frequency Band486 to 558 MHz
Length4.7" (120 mm)
Weight0.1 oz (3 g)
Packaging Info
Package Weight0.02 lb
Box Dimensions (LxWxH)6 x 4 x 0.1"

Related Questions and Answers

Q: 1. Hi, You have this antenna range A? For body pack

A: The Sennheiser G2 Wireless Antenna for G2 Beltpack Series (486 to 558 MHz), BH #SE575297, will work with the G3 series transmitter beltpacks as well..

Q: 2. Hello Is the Sennheiser EW 100 G3 (558-626 MHz) compatible with this antenna?

A: Yes, the Sennheiser 578854 Antenna is compatible for use with for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz). The SK 100 G3 is the transmitter that is included with a Sennheiser EW 100 G3 Wireless Microphone System.

Q: 3. Will this antenna work for range G 566-608? And both receiver and transmitter?

A: Yes. The Sennheiser 578854 Antenna can be used with SK 100/300/500 and SK 2000 Bodypack Transmitters from the G2, G3, and G4 series that operate on any frequency band between 558 to 626 MHz.

Q: 4. this ítem come come un a pack of two?

A: This is a single antenna.

Q: 5. Will this work on the newer G3s?

A: Yes, I bought these antennas to replace some broken ones for ew100 G3, and they are worked good. I measured the length, check frequencies bandwidth with original A-band both are the same. Make sure to get the right bandwidth of the antennas, choose the right band. Easy to replace.B&H customers service is excellent.

Q: 6. Does this work with a G4-G band transmitter?

A: Yes, the Sennheiser 578854 Antenna for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz) is compatible for use with s Sennheiser SK 100 G4 Wireless Bodypack Transmitter that operates on the G frequency band which covers the range of 566 to 608 MHz.

Q: 7. Does this antenna work with my Sk/Ek 100 (516-558 frequency)? Thanks for your reply

A: This antenna only works in 558 to 626 MHz

Q: 8. Will this also work for a G2 EW-100? (the older model)

A: Yes, im fairly sure it will work. I used this part to replace the antenna on a Sennheiser receiver which I am guessing was the same model as yours the first EW100 that took two AA batteries instead of a single 9v. No problems as far as I can recall. Good luck.

Q: 9. This antenna suits for the G3 transmitter also?

A: Yes they do, and they are very easy to replace. With the right tools 5 min

Q: 10. How long of a cable run do you need to start thinking about using this?

A: Depends on the type of cable being used. Basic RG8X cable with passive antennas would be 25 feet. Higher quality cabling like RG213 or 9913 can be run up to 100 feet.

25/09/2024

Exact replacement part of sennhieser wireless transmitter packs

5
14/09/2024

Easy to replace with basic soldering skills. Good work Sennheiser.

5
06/09/2024

Expensive for what it is but needed with old transmitters and receivers. You must be comfortable with soldering and equipment maintenance to install this. I have 10+ years of circuit repairs and this was nothing for me but to someone new with small circuit soldering, you may want to go slow.

5
12/08/2024

This antenna worked fine although I used it on a G2 Band A 518-525. For indoors short range it works good. I could not find one specifically for my Freq. range.

5
25/07/2024

Easy to replace, I keep 5-6 around the shop to keep our inventory looking and working good.

5
14/07/2024

This is an excellent choice for replacing the damaged antenna on an IEM beltpack. The factory original antenna is an easy install and fits perfect. It took me less than ten minutes, and turned out perfect. I did find a YouTube video that details the process, although it seemed pretty obvious once you opened up the case. I’d definitely recommend this product.

5
03/07/2024

Exact replacement part, fair price, quick shipping. If you have the correct screwdriver to open the body pack and a soldering iron to melt the single connecter to the circuit board, this is an easy fix.

5
17/05/2024

This replacement antenna was exact OEM product, came packaged as such from Sennheiser, and arrived earlier than estimates.
Works as it should when installed. Be careful installing, some innards of the beltpack may not be able to be moved around to access the area as openly as some YouTube vids show. (With hot soldering iron)

5
21/04/2024

It was super easy to replace the old antennae. Sounds clear.

5
02/04/2024

Easy replacement! Requires tiny torx bits and one solder joint. Did it in 10 min.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Ioptron Extension Pier For Skyhunter

$204.00 $261.12

Products You May Like

Godox Ldx50r Rgb Led Light Panel

$747.00 $1,000.98

Nisi 82mm Pro Circular Polarizer Filter

$288.00 $408.96

Vidpro Vdl-75 4.2v Dual Bay Lcd Charger

$74.85 $94.31

Marathon Ma-2ubp Blank Rack Panel

$37.50 $45.38