The 3’ FCS015A-FR Hybrid Fiber Optic Receptacle Breakout Cable SMPTE/ARIB with 3 Connector from Camplex is used for panel mounting in blank panels or as a replacement in hybrid devices. This SMPTE hybrid breakout cable features a Canare FC-Series connector at one end and duplex LC male and copper leads terminated with a 6-pin AMP power connector at the other end. The cable integrates the power line for a TV camera, control line, and optical fiber for video and audio transmission. It adheres to SMPTE standards for HDTV broadcast camera use and is suitable for use in SMPTE rack panels, splice trays, adapters, and wall boxes.

It is assembled with Canare SMPTE standard studio broadcast cable. The cable consists of two single-mode optical fibers and four 20 AWG and two 24 AWG tinned copper conductors cabled around a steel strength element, with an overall tinned copper braid. This general purpose cable is used for studios, patching, and light to medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Assembled with SMPTE cable & Canare and Senko connectors

Electrical assemblies tested for continuity and shorts

Fiber optic assemblies tested for attenuation and back reflection

SMPTE 311M and 304M compliant

19.4 Mb/s to 3 Gb/s transfer speed

Stainless steel assembly

Rubber dust caps

Machine-polished fiber contact

Low insertion and return loss

Related Questions and Answers

Q: 1. Will this work for Sennheiser ew 100 g3?

A: Yes it should it has a locking connector. Then I assume you want to come out of the receiver and into your phone.

Q: 2. I want to use a lightning splitter so that I can simultaneously power my iPhone 11 with an external power source and record sound on the iphone using a Saramonic Blink B2 (or, alernatively on occasion, a hard wired Rode VideoMic NTG). Will this be possible and what is the best splitter B&H can recommend for this purpose?

A: Belkin Lightning Audio + Charge RockStar B&H # BEF8J198BTWH: https://bhpho.to/2rnPudM

Q: 3. I noticed the ml30bi power supply provides 16.8v but D-tap power supplies are usually 12v. Does this mean the ml30bi can run on 12v?

A: D tap batteries most are 14.4 volt and with the Godox D-Tap To DC Male Connector Cable you need to use batteries with that light that are 14.4 like this kit, https://bhpho.to/3eHTkGS

Q: 4. Will this work with a Sennheiser ew 100 G2 connected to a Iphone 11 Pro Max?

A: Yes, it should work nicely.

Q: 5. does this one works with Godox ML100Bi?

A: The Godox D-Tap To DC Male Connector Cable would fit the Godox ML100Bi, and some users have had success. However, since the voltage provided from the battery would be 14.4V (rather than the standard 20V that is provided by the AC power adapter), we cannot recommend using it as it would provide too little voltage to the product and performance could be sub-optimal.

Q: 6. The sampling frequency is shown as both 44.1 and 48. the bit rate as 16 and 24. Which is it? Can these parameters be selected?

A: The parameters are set by the app you use. But it can handle any of these bit and resolution rates: 16-bit 44.1KHz, 16-bit 48KHz, 24-bit 44.1KHz, or 24-bit 48KHz.

Q: 7. I would like to know if you have any specifications of use to know how many times I can clean the fiber optic connector?

A: This has more than 500 cleaning per cleaner.

Q: 8. What's the length?

A: The Godox D-Tap To DC Male Connector Cable is 6.25' long.

Q: 9. Would I be able to run this connector into a Female to Female 3.5mm Locking connector with a 7.5v lavlier mic (Me-2 or Sanken)?

A: The Saramonic LC-C35 is not compatible with 3.5mm locking connector mics.

Q: 10. Will this handle a line level input?

A: Yes, it can. While it is designed for the mic-level output of wireless receivers, as long as the signal is not overdriven it will accept a line-level signal.