This 15' SMPTE Hybrid opticalCON DUO Single Mode Fiber Outside Broadcast Cable fromCamplex is a SMPTE 311M compliant broadcast interconnect cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• COCA factory-terminated OpticalCON DUO NO2SX connectors, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. Does this connector also support single mode fiber? The manufacturers website seems to indicate that it does

A: Yes, The Neutrik NO4FDW-A connector will support single mode configurations. Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard Multi mode – black Single mode PC – blue Single mode APC – green More info - https://bit.ly/3ORnd5w

Q: 2. MY JK Audio is no longer connecting with Broadcast System. I can no longer connect my callers through my Arrakis System. The LED is stuck on send and no LED on caller! How do I get the system working again?

A: Please phone a B&H pro audio representitive to try and trouble shoot your problem.

Q: 3. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 4. How does one specify the termination & pinouts?

A: This headset provides a bare-wire pigtail for soldering your own connectors.

Q: 5. How many phone calls can I take with this system? Nathan

A: Physically there is one silver satin or phone line connection. To reach multiple lines we use AT&T audio conference service.

Q: 6. Does this have OpticalCON Duo or Quad?

A: It's DUO.

Q: 7. Is there away to reset My JK Audio? I can no longer connect my callers thru my Broadcast Board.

A: Reading thru User Guide on Re-setting unit, no mention. https://www.jkaudio.com/downloads/user-guides/JK-Audio-Broadcast-Host-User-Guide.pdf If Unplugging from the wall doesn't work, call JK: JK Audio, Inc. 1311 E 6th St. Sandwich, IL 60548 United States Telephone: 815.786.2929 Toll Free: 1.800.jkaudio Fax: 815.786.8502 www.jkaudio.com

Q: 8. Could this be connected to a Zeus Intercom matrix?

A: B&H does not support the Zeus Intercom matrix and I am unable to definitively answer your question. However, I am able to advise you in general. Intercom systems, though many have 3 pin XLR connectors for audio, are actually wired differently and have 30V running down the cable. Connecting from an intercom's loop-thru may be detrimental as this signal can potentially burn out an audio device such as the JK Audio Host. Some intercom systems provide a standard analog audio out. If the Zeus intercom matrix falls in this category, you may connect it to the JK Audio broadcast Host.

Q: 9. Is there a mirror flip option for using in a teleprompter?

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have a mirror flip option at this time.

Q: 10. Does this product work with cellphone besides telephone?

A: It's not compatible with smartphones, only telephones with a RJ11C cable.