2.5 Sata Hard Drive 16Tb

Vantec Nexstar Se 2.5" Sata Hard Drive Rack Tray For Nexstar Se Series Racks

Product Code: ga29007
Availability: In Stock

$20.97 $27.26

Qty

14 reviews Write a review

Description
Reviews (14)

The NexStar SE 2.5" SATA Hard Drive Rack Tray from Vantec supports a 2.5" SATA I/II/III hard drive or SSD. It can be used with Vantec's NexStar SE series racks.

Key Specs
Drive Size	1x 2.5"
System Bay Size	1x Proprietary Bay
Hot-Swap Support	Yes
System Connection	SATA 3 (6 Gb/s)
Parameters
Maximum 2.5" SATA Drive Height	15 mm
System Bay Size	1x Proprietary Bay
Hot-Swap Support	Yes
System Connection	SATA 3 (6 Gb/s)
Material of Construction	Plastic
Dimensions	5 x 3.5 x 0.7" / 12.7 x 9 x 1.7 cm
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	5.1 x 3.6 x 0.7"

Tool-free hard drive installation

Hot-pluggable

Related Questions and Answers

Q: 1. Is the enclosure made of plastic, or aluminum?

A: This woudl be made out of Plastic.

Q: 2. Does this support 2.5 SATA III SSD drives?

A: This enclosure is designed for 3.5" drives. You can get 2.5" to 3.5" SATA adapters to use a 2.5" SATA drive.

Q: 3. how long is the cable?

A: The USB cable included with the Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station is roughly 18" long.

Q: 4. Does it contain a conductive cable inside the case or not?

A: Per our product listing, in the Box:Sabrent 2.5" SATA to USB 3.0 Tool-Free External Hard Drive Enclosure, USB 3.0 Cable, and Limited 1-Year Warranty Extension with Product Registration

Q: 5. Will this work with Nikon 8x30 EII?

A: The Nikon 8x30 EII Binocular is no longer available.

Q: 6. Does it support RAID? If so, which levels?

A: The Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station does not support RAID setups on its own.

Q: 7. Does this drive support 16TB drives? Or does it support any drive? Like can it put 4 16TB+ Drives in this?

A: According to Sabrent, you can use any 3.5" disk of your choosing for the Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station (B&H # SADSSC4B).

Q: 8. Not able to see my SSD installed in this enclosure when I plug this into another MacBook, any ideas?

A: Be sure the SSD is properly attached, open disk utility to view all connected devices check if formatting is an issue. Also check the drive on other units to see if it's a issue only on one machine, or if it could be the drive itself.

Q: 9. How do you turn off power saving if hooked up to a nas?

A: The power saving feature of the Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station can not be disabled, so we do not advise using it with a NAS enclosure.

Q: 10. The Nikon SE Series Binocular Tripod Adapter attaches to the center stabilizer bar on the binocular. I have an older Nikon 7x50 Feather-Weight binocular with center bar that is 13 mm shaft diameter. Will this adapter work?

A: Designed for their Premier SE and Astronomy models, the Nikon SE Series Binocular Tripod Adapter attaches to the center stabilizer bar to allow hands-free use. his adapter is also compatible with most binoculars outfitted with bars with a diameter of no more than 14mm.

PJ	27/09/2024
Hold's my SE6 very nicely. 5

Boisdee	09/09/2024
This is a long over due upgrade to my Celestron Nexstar 9 1/2. Now I need to buy one for my 7 Nexstar. 5

Dwight	09/09/2024
This fit our Celestron telescope and all equipment with the exception of the tripod. Good stitching, zippers and padding throughout. Very well made/designed. 5

CW	13/07/2024
Works as advertised--holds my NexStar 6SE. 5

Piyush	26/06/2024
Best service to over seas costumers .. I had a damaged controler wt my 8 se telescope .. on intimating B&H they teplaced it immediately free of cost and paid the courier charges to India . Thanks to B& H team and costumer care of overses costumers 5

Stephen	26/05/2024
I would buy again. 5

Eric	05/05/2024
Great case, my celestron nexstar 6 fits perfectly. I wanted to buy for some time, it was a great choice. All accessories fit perfectly, it is a hard case, very protective. 5

Gary	28/04/2024
Bought a Celestron telescope with Wi-Fi capability. It was a bit cumbersome to have a tablet or PC to control the telescope.. So I purchased the hand controller and it worked perfectly for a beginner. Still have a lot to learn, but atleast I can now easily setup the alignment on the telescope. Definitely worth the cost for me. 5

Rodney	23/04/2024
Due to a GPS rollover bug in my previous hand controller for my Nexstar 925 GPS telescope, I was forced to purchase a newer version of the hand controller that the firmware can be updated. Now all I need to do is update it to the latest version. I do miss the GPS align though, but at least the date will be set correctly and Skyalign will work properly. 5