This 10' SMPTE opticalCON DUO Single-Mode Outside Fiber Tactical Snake Cable from Camplex is a two-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return, and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Two-Fiber Outdoor/Indoor Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• Two-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON DUO NO2SX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight-buffered PUR cable

Related Questions and Answers

Q: 1. Can the divider be added to an empty case of pelican 1615? OR require any additional base foam/padding layer?

A: Yes, the dividers are designed and made for pelican 1615 case.

Q: 2. Does this recognize/transmit custom resolutions?

A: Hello Greg. This set is designed primarily for standard/non-custom resolutions and is not guaranteed to work with all custom resolutions. Our CMX-HDMI-SFPL also supports some custom resolutions but is designed to primarily support standard/non-custom resolutions as well. We unfortunately aren't able to test all custom resolutions, however if you have a specific one you are looking to use you can email sales@camplex.com and we can look into that for you. Thank you.

Q: 3. will this IR work on a Harman Kardon avr 320-i can't find an HE 1000 that is recommended?

A: I would think so, John. The original remote (or multi-function remote programmed by the original or downloaded IR codes) should pass right thru and into the IR receiver window on the front panel. Make sure that you have a power supply and connecting block to use this emitter

Q: 4. What is the length of each segment -- that is, from an individual XLR plug to where it enters the four-cable bundle, and the segment where the four cables are bundled together? For instance, if the "fanned" portions were 2' each and the bundled portion were 10', it would be 14' from a male XLR plug to its matching female plug.

A: I just measured my cable, and each fan is approximately 2' and the bundled segment is about 6', so the total length (XLR male to XLR female) is the advertised 10'. You do not get a "bonus" 4' due to the two fans -- their length is included.

Q: 5. Will this fit to IM2720?

A: The A-MoDe Limited Divider Set for Pelican 1610 is designed for the Pelican 1610 Case with Foam Set (B&H # PE1610FB). It will not work with the Pelican iM2720 Storm Trak Case with Foam (B&H # PEIM2720B). Pelican does have a divider kit for the iM2720 case through their site: https://bit.ly/3O1Ojrx

Q: 6. I would like to know if you have any specifications of use to know how many times I can clean the fiber optic connector?

A: This has more than 500 cleaning per cleaner.

Q: 7. Does the back of the pouch have button straps or loops so it can be attached to a Pelican Molle panel?

A: Tenba Tools-Series Duo 8 Cable Pouch has loops on each corner so you can use multiple methods of attaching this pouch to Pelican EZ Click MOLLE Lid Panel. The back of the pouch has a 8.5 x 8 x 1.5" pocket. You can use the following fasteners. PortaBrace PS-6 6" Piggin String (Set of 3) BH #POPS6 • MFR #PS-6 https://www.bhphotovideo.com/c/product/65641-REG/Porta_Brace_PS_6_PS_6_6_Piggin_String.html

Q: 8. Does this have only one SDI cable or two? Description says "an", but the picture shows 2.

A: It has one SDI cable and one Composite cable. Both have BNC Connectors, however one is a digital HD-SDI Cable and other is an Analog Composite Cable.

Q: 9. Does this work with the Serv 4K? It's not listed but I assume it does.

A: The Node II LTE/4G/3G Multi-Mode Modem Module from Teradek is designed specifically to interface with the Teradek VidiU Go. The Teradek SERV 4K is not listed.

Q: 10. I'm looking for a divider set that serve as second layer only (that only take half of depth of 1615) do you have such item?

A: Unfortunately, there is not a divider system that is able to serve as a second layer. No divider system is small enough in height.