The Camplex opticalCON QUAD to QUAD Multimode X-TREME Fiber Tactical Cable (250 ft) is a cut-proof and rodent-resistant tactical snake cable for for severe environments. It supports 4 optical channels and features a double jacket glass yarn armored construction and black PUR outer jacket. The connector features an all-metal housing and spring-loaded push-pull locking mechanism, and it's well protected against dirt and dust by an automatically operated sealing cover.

The cable is tested for < -55dB return loss and comes with diagnostics documentation.

Cut-Proof and Rodent-Resistant    Double Jacket Glass Yarn Armored    Black PUR Outer Jacket    Metal Housing Connectors    Spring-Loaded Push-Pull Locking    Automatically Operated Sealing Cover    < -55dB Return Loss

• Survivable, tight-buffered cables for severe environments
• Flame retardant and watertight and suitable for indoor and outdoor use
• Helically stranded cable core for flexibility
• Mechanical fiber protection
• Core-bonded Polyurethane inner and outer jacket
• Glass-rovings between inner and outer jacket for improved mechanical strength
• 30+ years predicted lifetime
• Automatic sealing shutter with silicone gasket providing dust and dirt protection
• Dust and water resistant according to IP65 in mated condition

Related Questions and Answers

Q: 1. Will this pass visual time code?

A: If you are feeding this unit a signal that has Time Code Displayed it will see the Time Code and display it as well. If this is not what you are asking about and require some further assistance feel free to email us directly at provideo@bhphoto.com.

Q: 2. Would this fit the Astera Titan Tubes?

A: The two items are not compatible.

Q: 3. What size inner tube should I get for this dolly? The dolly I have has one wheel where the valve meets the inner tune itself is completely severed.

A: I would advise connecting directly with ProAim for support and repair. They may need images of the damage to help. Contact - https://bit.ly/3Bcvie5

Q: 4. Do you get 4 Skate Wheel Trucks in this package?

A: In this package you get one truck.

Q: 5. Are these wheel’s rubber soft or hard?

A: the wheels are hard rubber

Q: 6. Could I use this product for a video wall of three monitors? I would like to be able to display a 1x3 video on these monitors at 1080P resolution for each monitor.

A: Dear Kelly, This is Jules from product support at Symbiosis, Decimator's master distributor for your region. The MD-Quad has four 3G-SDI inputs, one 3G-SDI output and one HDMI output. Both outputs carry the same picture at the same format. You wouldn't be able to drive three monitors with different tiles of your source to produce a video wall. The MD-Quad effectively works the other way round to take up to four inputs and put them onto one monitor. I hope this helps but if you have any questions please feel free to contact us on support@symbiosis.com. Kind Regards Jules

Q: 7. How does IP addressing work? Does the unit pull 4 IPs from my network or reuse 1? I am trying to determine if I will end up with a quad-display inside one of the camera zone's on my NVR.

A: All this unit does is convert the Ethernet signal to work over coax, your router will still provide each device with an IP address. You will still need the VHW-HWPS-C​ to make this work properly.

Q: 8. What is the resolution of the HDMI output? My goal is to feed 4 1080p SDI inputs into one 4K HDMI output.

A: The DECIMATOR MD-QUAD 3G/HD/SD-SDI Quad Split Multi-Viewer with SD/HD/3G-SDI & HDMI Outputs Version 3 can only output a max resolution of 1080p via the HDMI output. The Blackmagic Design MultiView 4, BH #BLMV4, would allow for 4 1080p SDI inputs to output via HDMI in 4K.

Q: 9. how many amps does this pull? When it is powered.

A: About 6 watts or less.

Q: 10. Does the unit come with a power supply already or is that separate?

A: The Veracity HIGHWIRE Powerstar QUAD does not come with a power supply. A 57V power supply is separate.