Designed to eliminate the extra step of finishing the screen with trim, the 120V 24706BLS Tensioned Advantage Electrol 54 x 96" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24706FLS.

110" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Anyone please tell me the actual depth of this box? The specs on this site aren't making sense.

A: As per the manufacturer, the depth of this softbox is 20"

Q: 2. what lav comes with the tentacle sync track e?

A: The Tentacle Sync Track E includes an omnidirectional lavalier microphone that plugs into its locking 3.5mm connector.

Q: 3. What is the right cable to connect the RED Komodo EXT port for timecode?

A: The Tentacle Sync SYNC E can be used as the Timecode generator to feed a signal into to RED Komodo.

Q: 4. Can tentacle sync send lavaliere audio to camera?

A: No, the Tentacle Sync Trak e is only capable of recording audio to its internal memory. It cannot send audio wirelessly to other devices.

Q: 5. Could you plug something like the Rode Newscaster receiver into this to achieve wireless, TC-synced boom audio?

A: Yes, you can connect the wireless receiver from the RODELink Newsshooter Kit Digital Camera-Mount Wireless Plug-On Microphone System to the input on the Tentacle Sync TRACK E Pocket Audio Recorder. However, the input on the TRACK E uses a locking 3.5mm TRS connector, so you will need to use an adapter to enable connection. You can use the Sennheiser CL1 3.5mm to 3.5mm Output Cable (B&H # SECL1), which has a locking 3.5mm connector on one side to connect with the recorder's locking input and a standard non-locking connector on the other side which you can join together with the standard non-locking connector on the receiver's output cable using the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF).

Q: 6. can you use a shotgun microphone with the track E?

A: Yes, you can use a shotgun microphone with the Tentacle Sync Track E Pocket Recorder, however, the mic will need to connect using a 3.5mm TRS locking connector and must either operate using a battery for power or be capable of functioning with plug-in power of 5V of less. For example, the Rode VideoMic GO II (B&H # ROVMGII) or VideoMicro (B&H # ROVIDEOMICRO ) can be used when connected with a cable like the Sennheiser CL1 3.5mm TRS to 3.5mm TRS locking cable (B&H # SECL1). Or you can use a mic like the Sennheiser MKE 600 Shotgun Microphone (B&H # SEMKE600) when powered with a AA battery and connected with a cable like the Sennheiser CL2 (B&H # SECL2) XLR female to 3.5mm TRS locking cable.

Q: 7. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 8. Can I use this with a sennheiser mke2 lave mic that needs 7.5v?

A: Yes, the Track E can be used with a Sennheiser MKE 2 or most any lav with a 3.5mm connector.

Q: 9. Can you use the app to rename the filenames of the recordings?

A: You cannot rename the files in the app but you can name the devices in the app.

Q: 10. Is there a tentacle sync compatible recorder that can provide 48V phantom power?

A: Almost any professional audio recorder with XLR microphone inputs will be able to provide phantom power. When it comes to compatibility with the Tentacle Sync, the best option would be a recorder with timecode input such as the Zoom F6 for example. However, your choice of a recorder should be based on your needs such as number of inputs, recording format, and so on, and in a pinch timecode data from the Tentacle Sync can be recorded on a spare audio track.