Designed to eliminate the extra step of finishing the screen with trim, the 120V 24712BLS Tensioned Advantage Electrol 57.5 x 92" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24712FLS.

109" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Low Voltage Control (LVC)

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Could we record a Universal Audio Sphere DLX Modeling Microphone into the Tentacle TRACK E somehow? What about power?

A: The Universal Audio Sphere DLX Modeling Microphone (B&H # UNMICUADLX) is not compatible for direct connection to the Tentacle Sync TRACK E Pocket Audio Recorder. Aside from the different connector type, the recorder cannot supply enough voltage to power the mic. You will need to use a separate phantom power supply like the Mackie M48 Single-Channel 48V Phantom Power Supply (B&H # MAM48), and an adapter cable like the Sennheiser XLR Female Microphone Cable (B&H # SECM1), which has a locking 3.5mm connector that will connect to the input on the recorder.

Q: 2. Can you use the app to rename the filenames of the recordings?

A: You cannot rename the files in the app but you can name the devices in the app.

Q: 3. Will this device allow me to use an external mic, as well as receive the timecode from the Tentacle Sync at the same time? I have a Panasonic GH5.

A: The Tentacle TRACK E itself does not output a Time code signal. Instead it can get synced with a Tentacle Sync SYNC Es. This tiny Time code generator can feed any DSLR/Mirrorless camera with Audio TC. To feed an external mic into your GH5 you can use the following adapter: https://bhpho.to/2Sw5pE7 The splitter cable allows you to record an external mic along the auxiliary time code signal on your GH5.

Q: 4. What is the right cable to connect the RED Komodo EXT port for timecode?

A: The Tentacle Sync SYNC E can be used as the Timecode generator to feed a signal into to RED Komodo.

Q: 5. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 6. If my camera don't have timecode do I need a Sync E too ?

A: When used alongside a camera that does not have timecode onboard, the Tentacle Sync TRACK E Pocket Audio Recorder with Lavalier Mic and Timecode Support could pair with a Tentacle Sync E mkII Timecode Generator, where the Sync E feeds timecode into the camera's audio input to be recorded and decoded later in editing for syncing with the TRACK E's recorded audio.

Q: 7. Is there an adapter or way to use my Sony Sanken COS11d to with the Track E?

A: Regarding the Tentacle Sync TRACK E Pocket Audio Recorder Basic Box with Timecode Support (Recorder Unit Only), the Tentacle Sync TRACK E Pocket Audio Recorder is not compatible for use with microphones that are wired for compatibility with Sony transmitters, but mics wired for compatibility with Sennheiser transmitters can be used. There is no adapter for the Sony mic.

Q: 8. Will there be a version that doesn't include a kit lav? I already own a good quality lav.

A: At this time, the only version offered includes a lavalier mic.

Q: 9. Can these products be used with a DPA lav?

A: You would need a DPA lav that is made for compatibility with Sennheiser 3.5mm locking connectors like BH #DP4080DCDB34 for example.

Q: 10. Just got this. If it records mono only, can I input a TRS connector without damaging the unit? Does it use Tip and Sleeve only?

A: The Tentacle Sync TRACK E Pocket Audio Recorder does use a locking 3.5mm TRS connector and it will record one track with audio on both the left and right sides. The included lavalier microphone has a locking 3.5mm TRS connector which provides dual mono audio (same audio on the left and right sides), which is the standard wiring configuration used for most microphones with a 3.5mm TRS connector.