Designed to eliminate the extra step of finishing the screen with trim, the 120V 24713BLSI Tensioned Advantage Electrol 60 x 96" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24713FLSI.

113" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is there an adapter or way to use my Sony Sanken COS11d to with the Track E?

A: Regarding the Tentacle Sync TRACK E Pocket Audio Recorder Basic Box with Timecode Support (Recorder Unit Only), the Tentacle Sync TRACK E Pocket Audio Recorder is not compatible for use with microphones that are wired for compatibility with Sony transmitters, but mics wired for compatibility with Sennheiser transmitters can be used. There is no adapter for the Sony mic.

Q: 2. Will this also be offered with a TA4 Connector? I've only seen a Sennheiser connector mentioned.

A: Yes, you can jam-sync the Tenatcle TRACK E from an Original Tenatcle via the 3.5mm TRS cable.

Q: 3. Can this device also work as an on-camera recorder? I would like to plug in a Rode VideoMic NTG to take advantage of the small size and 32 bit float technology and then also send the sync signal from the recorder to my unbalanced audio in jack. This solution would be amazing for cameras with bad pre-amps when you need to shoot with a mic on the camera. I don't mind connecting to a Sync E to complete this task if necessary but I would love to have a small, 32 bit float recorder on my camera (rather than both devices on the camera). Thanks

A: A shotgun mic with an XLR connection can be attached to this unit using an adapter cable, such as the Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser G3 / G4 Transmitter (2'), BH #RECASENK1KG3. While Time Code cannot be sent out of the Sync Track E, it can be accepted or jam sync'ed , using a Sync Sync E Timecode Generator with Bluetooth (Single Unit), BH #TETE1, which would then be outputted to your camera's 3.5mm mic input.

Q: 4. Right out of the box, is the unit's default set to 24 or 32 bit audio?

A: The default is 24-bit.

Q: 5. Can I use a time code sync as well as a mic/recorder? Like the sync-e. Dual function

A: No, the TRACK E works via Bluetooth with the Tentacle Setup App. You can change the settings, sync it with other Tentacles or start and stop the recording wirelessly. It can also get jam-synced by external Timecode source. But it doesn't give the signal out! So it cannot replace a Tentacle SYNC E.

Q: 6. How can I listen to the audio as it's being recorded? Let's say I'm using a Canon c300 or even a Red Komodo?

A: Sorry, no headphone output, and the input connector is locked, so, there is no way to use a monitoring cable.

Q: 7. Can I monitor the sound through the headphone jack and through the phone when using Track E here in Philippines?

A: Yes you can monitor audio through the headphone jack on your smartphone using the Tentacle Sync Track E.

Q: 8. If I use a Tentacle with a Zoom H6, recording the timecode audio in one channel and at the audio output of the H6 I connect it to a camera via 3.5mm. Can post-production synchronize the timecode audio generated by the Tentacle of the h6 and the camera?

A: The Zoom H6's line output downmixes all channels to stereo. The only way to preserve isolation would be to record your timecode and audio as a stereo channel, with each panned hard left/right.

Q: 9. Can I use RODE Lavalier GO Omnidirectional Lavalier Microphone? I one 2 of them already. it does not have Thread

A: The Tentacle Sync TRACK E requires a lavalier with a Sennheiser-style locking 3.5mm connector. A non-locking 3.5mm connector will not be compatible.

Q: 10. Can I monitor audio with my bluetooth connected wireless headphones from my iphone that has the app and is also connected to the Tentacle via bluetooth?

A: No, the Bluetooth feature on the Track E is only for syncing and it does not carry an audio signal for headphones, just status. Perhaps they may add that type of option in the future. For now, the only way to listen to the audio for monitoring is through the wired headphone jack on the Track E.