Camera Backpack Easy Access

Argosy 90 Series Workstation Desk For Three Digidesign C|24 Controllers With Monitor Insert (mahogany)

Product Code: ga29161
Availability: In Stock

$17,999.97 $23,579.96

Qty

14 reviews Write a review

Description
Reviews (14)

The mahogany 90 Series Workstation Desk for Three Digidesign C|24 Controllers from Argosy features a monitor insert bay. The MDF-made chassis offers strength and durability, while the open design provides minimal acoustical influence, prevents thermal build-up and permits easy cable access. Behind the meter bridge is an enclosed utility area with easy access through detachable lids and back access panels.

Detachable lids mounted on adjustable hinges and a full-length back panel provide easy access to utility areas, while multiple cable grommets in the back main platform provide convenient cabling access. Desk inserts offer additional working space and flexibility to accommodate different configurations.

Desk
Dimensions	149 x 44.5 x 37.5" / 378 x 113 x 95.2 cm

Mahogany hardwood end-panels
Monitor arms
Padded armrests
Rack & monitor inserts allow integration of vital rackmountable electronics in the control surface
Multiple independent lids make for convenient utility access without having to clear off the entire bridge
Enclosed utility area behind meter-bridge
Adjustable internal shelves support ancillary equipment
Transverse steel support bar provides extra strength to main platform and armrest assembly
Console body suspended above floor for better sonic transparency
Removable back panels provide access to cabling and equipment
11 RU rack can be installed left or right
Precision fit and finish
Powder-coated components
Locking casters
Blank panels

Related Questions and Answers

Q: 1. Will this console fit 2 Mti2s?

A: The Slate RAVEN MTi2 has a width of 25 3/4 . The Argosy Dual 15L specifies a width of 52.5 at the narrowest point between rack modules. Full dimensional drawing of the desk can be found at the following link: http://bit.ly/2cufFDx

Q: 2. Are the arms made out of plastic?

A: The extensions arms of the Mount-It! Dual Monitor Desk Mount with Mechanical Springs BH #MOMI2672 are made from metal.

Q: 3. can this REALLY fit THREE 32" monitors?

A: Yes. The Mount-It! Triple Monitor Desk Mount for 24 to 32" Displays BH #MOMI2753 will accommodate up to 3 32" monitors.

Q: 4. Hi! I see that this mount is rated to work with monitors 24" to 32" in size. Will this work with smaller monitors? The only reason I can think why this wouldn't work with smaller monitors (such as my two 20" monitors) is that it will not allow smaller monitors to get close enough to touch each other. Can anybody confirm this for me, or let me know why this mount won't work with smaller monitors? Thanks!

A: The Mount-It! Full Motion Triple Monitor Desk Mount for 24 to 32" Displays BH #MOMI753XL features this specification: Supported Screen Sizes 24 to 32" / 61.0 to 81.3 cm Number of Displays Supported 3 Load Capacity 22 lb / 10 kg (Per Arm) Mounting-Hole Pattern 75 x 75 to 100 x 100 mm Orientation Landscape, Portrait Supported Grommet Size Depth: 3.25" / 82.55 mm Though not specified,, smaller monitors may work.withis mount .

Q: 5. Can you please send me the dimensions for this desk? -- Or the specs?

A: The dimensions for the On-Stage WS7700b are as follows: Dimensions: 56" (L) x 32" (D) x 38" (H) Keyboard Tray Dimensions: 27" x 15" Main Work Surface Overall Dimensions: 56" (L) x 26" (D) Main Work Surface Usable Dimensions: 56" (L) x 17" (D) Upper Work Surface Dimensions: 53" (L) x 17" (D) Computer Holder Dimensions: 9.25" (L) x 12" (D) x 28" (H) Total Rack Space: 6U Shallow (3U left + 3U right) Rack Width: 19" Rack Depth: 9.5" Weight Capacity: 175 lb Construction: MDF & Steel Color: Black

Q: 6. Can this be mounted on a glass desk?

A: The K&M 23875 Dual Monitor Desk Mount BH #KMDVMDMB could be mounted to a fully-tempered, impact resistant glass desk

Q: 7. Would this work with a Wacom Cintiq 16? Is it sturdy?

A: No, the Wacom Cintiq 16 does not have a VESA mounting pattern and would not be compatible with the Mount-It! Single Monitor Desk Mount (B&H # MOMI4761). The Wacom Cintiq 16 is compatible with the Wacom Adjustable Stand for Cintiq 16 (B&H # WAACK620K).

Q: 8. where is this manufactured?

A: The Kohala Tycoon Series 24 Mahogany Concert Ukulele is manufactured in Thailand.

Q: 9. What's load capacity per arm?

A: The Mount-It! Dual Monitor Desk Mount with Mechanical Springs BH #MOMI2672 has a weight capacity of 17.6 lbs. per arm

Q: 10. is it easy to assemble and disassemble?

A: The ease or difficulty depends greatly on experience. The Argosy Aura 260 Personal Workstation Desk ships in about 7 boxes. The install may be a bit time consuming (maybe 3-4 hours) and I'd recommend 2 people be tasked with the job.

Typical Guy	26/09/2024
At the end of last year, I relocated my work from an overseas location to remotely working from home. So I bought this Monitor Desk Mount to set up my home office. I was really excited how I could use two 32" monitors stacked vertically and a longer Portrait orientated monitor for my emails. Unfortunately, the top monitor arm would not support my monitor. So it just rested upon the lower monitor which in about a week or two I was constantly re-supporting them. After a really big project that just took all of my time I decided I was going to built some sort of support bracket out of wood. But then I thought this bracket is well designed and there surely is some sort of tension control built in. After going to the manufacture's sight, I found a short video in the product's documents entitled, "How To Adjust Gas Tension Spring." I watched the video, got the handy-dandy allen wreches and within seconds fix "My Issue". I now have a fully functioning work station, with the lower 32" monitor set at eye level, the upper 32" monitor set angled slightly down to meet my upward gaze and a 24" side monitor set in Portrait for email monitoring. If only I wasn't such a typical guy and read the instructions (watched the video) first. I could have had this great set-up months ago. 5

David	03/09/2024
Product arrived on-time, was easy to assemble and is well made. This product frees up desk space and can be installed with two screw clamps or by drilling two holes into the desktop. It is very sturdy and I expect it will last for many years. 5

TPO	28/08/2024
Love the way these gas powered arms easily help you move the arms! 5

Kurtis	19/08/2024
Extremely pleased with this product. It has a matte black finish. Installs cleanly with one bolt. You may need to drill a hole like I did to install. Only other tool required is a Phillips screw driver. All the tools you will need to install is in the packaging. VESA mounting screws included. Even comes with extra cable clips and arm covers if you loose or brake them. Arm pole did not budge when I tried to force it off with my own arm strength. Highly recommend! 5

gtran	16/08/2024
Very solid and sturdy. Love it so far. It was missing the decorative cover but I am fine with it because it is so well built. 5

eweye	16/08/2024
Used one for a keyboard tray and one for a laptop tray. They are very heavy duty, and provide the flexibility I need for my very busy desktop. I've shortened them for both the keyboard and laptop tray to keep them clean on the desktop. I also love the handle to adjust the height, rather than having to use a hex key. 5